Chapter 4 Station Mode
4.6.2 WPS: PIN - Use this Device's PIN
This screen allows you to use the WPS Personal Identification Number mode, by entering the
NWD-270N's unique PIN in the configuration utility of the other WPS-enabled device. See
Section 3.4.2 on page 36
in the Adapter screen. The following screen displays.
Figure 47 WPS: PIN - Use this Device's PIN
The following table describes the labels in this screen.
Table 18 WPS: PIN - Use this Device's PIN
LABEL
This device's PIN
Start
60
for more information. Select WPS and PIN - Use this Device's PIN
DESCRIPTION
This is the NWD-270N's Personal Identification Number (PIN). This
field is read-only. Enter the number that displays in this field into the
configuration interface of the other WPS-enabled device.
Note: Each time this screen displays, the PIN is
different. The PIN is valid for only one WPS
transaction.
Click this to start WPS. You must start WPS on the other WPS-
enabled device within two minutes.
NWD-270N User's Guide