Table of Contents
Advertisement
The following figure shows you an example to set up wireless network and security by
pressing a button on both the AP (the NBG334W in this example) and the NWD-270N.
Figure 7 Example WPS Process: PBC Method
2.2.2 PIN Configuration
When you use the PIN configuration method, you need to use both the NWD-270N's utility
and the AP's configuration interface.
1 In the NWD-270N's Adaptor tab, select WPS and PIN - Use this Device's PIN. Note
down the PIN in the screen that appears.
2 Enter the PIN number in the AP's configuration interface. In the NBG334W, use the PIN
field in the Network > Wireless LAN > WPS Station screen.
3 Click the Start buttons on both the NWD-270N utility screen and the AP's configuration
utility (the WPS Station screen on the NBG334W) within two minutes.
The NBG334W authenticates the wireless client and sends the proper configuration settings to
the wireless client. This may take up to two minutes. Then the wireless client is able to
communicate with the NBG334W securely.
The following figure shows you the example of configuring the wireless network and security
on the NWD-270N and the AP (ZyXEL's NBG334W in this example) by using the PIN
method.
NWD-270N User's Guide
You
WITHIN 2 MINUTES
SECURITY INFO
COMMUNICATION
Chapter 2 Tutorial
AP
23
Advertisement
Table of Contents
Troubleshooting
