Figure 4 Adding More Powerline Adapters to Your Network
B
This sets up your powerline network between your powerline devices.
2.3 Removing a Device from a Powerline Network
Suppose you want to remove PLAs (C) and (D) from the following powerline network.
Figure 5 Removing Devices From an Existing Powerline Network
B
C
Press the RESET/ENCRYPT button on powerline device C for 5 to 8 seconds and then release it.
1
This disconnects C from the current network.
Press the RESET/ENCRYPT button on powerline device D for 5 to 8 seconds and then release it.
2
This disconnects D from the current network.
Chapter 2 The RESET/ENCRYPT Button
A OR B
C
A
D
PLA Series User's Guide
A OR B OR C
14
A
D