C
H A P T E R
2.1 Overview
This tutorial shows you how to join a wireless infrastructure network using the ZyXEL utility.
The wireless client is labeled C and the Access Point is labeled AP.
Figure 6 Infrastructure Network
2.1.1 What You Can Do in This Tutorial
• Connect securely either to an infrastructure AP using the WPS protocol. See
on page 22
• Connect securely to an infrastructure AP using many of the strongest and most common
encryption protocols. See
• Save a your settings so that you can later connect again to an infrastructure AP with a
single click. See
• Configure your NWD-270N as an Access Point (AP), allowing other devices to connect to
it and share its network connections. See
2.1.2 What You Need to Know
The following term may help as you read through this section.
WPS
Wi-Fi Protected Setup (WPS) is a security protocol that lets two or more devices connect
securely to one another with a minimum amount of hassle on your part. It most cases,
establishing a secure connection with another WPS device is as easy as pushing a button.
NWD-270N User's Guide
for details.
Section 2.3 on page 25
Section 2.3.2 on page 27
Tutorial
for details.
for details.
Section 2.4 on page 29
for details.
2
Section 2.2
21