Configuring The Nwd-270N As An Ap - ZyXEL Communications NWD-270N User Manual

Only one profile can be activated and used at any given time.
Figure 18 ZyXEL Utility: Profile Activate
8 When you activate the new profile, the ZyXEL utility goes to the Link Info screen while
it connects to the AP using your settings. When the wireless link is established, the
ZyXEL utility icon in the system tray turns green and the Link Info screen displays
details of the active connection.
9 Make sure the selected AP in the active profile is on and connected to the Internet. Open
your Internet browser, enter
the address bar and press ENTER. If you are able to access the web site, your new profile
is successfully configured.
10 If you cannot access the Internet, go back to the Profile screen. Select the profile you are
using and click Edit. Check the details you entered previously. Also, refer to the
Troubleshooting section of this User's Guide or contact your network administrator if
necessary.

2.4 Configuring the NWD-270N as an AP

In access point mode, your NWD-270N allows you to set up your wireless network without
using a dedicated AP. See
After you install the ZyXEL Utility and then connect the NWD-270N to your computer,
follow the steps below to set up your NWD-270N as an AP.
NWD-270N User's Guide
http://www.zyxel.com
Chapter 5 on page 65 for more information.
Chapter 2 Tutorial
or the URL of any other web site in
29