ZyXEL Communications NBG-417N User Manual page 91

This screen displays when you select PPPoE encapsulation.
Figure 61 Network > WAN > Internet Connection: PPPoE Encapsulation
The following table describes the labels in this screen.
Table 40 Network > WAN > Internet Connection: PPPoE Encapsulation
LABEL
ISP Parameters for Internet Access
Connection Type
Service Name
User Name
Password
Retype to
Confirm
Nailed-Up
Connection
Idle Timeout
DNS Servers
NBG-417N User's Guide
DESCRIPTION
Select PPP over Ethernet if you connect to your Internet via dial-up.
Type the PPPoE service name provided to you. PPPoE uses a service name to
identify and reach the PPPoE server.
Type the user name given to you by your ISP.
Type the password associated with the user name above.
Type your password again to make sure that you have entered is correctly.
Select Nailed-Up Connection if you do not want the connection to time out.
This value specifies the time in minutes that elapses before the router
automatically disconnects from the PPPoE server.
Chapter 7 WAN
91