Wlan And Maintenance Settings; Logging In To The Web Configurator In Ap Mode - ZyXEL Communications NBG-417N User Manual

Chapter 4 AP Mode
LABEL
IP Subnet
Mask
Apply
Reset

4.4.2 WLAN and Maintenance Settings

The configuration of wireless and maintenance settings in AP Mode is the same as for Router
Mode.
• See Wireless LAN (63)
• See System
information on configuring your maintenance settings.

4.5 Logging in to the Web Configurator in AP Mode

Connect your computer to the LAN port of the NBG-417N.
1
The default IP address of the NBG-417N is "192.168.1.2". In this case, your computer must have an
2
IP address in the range between "192.168.1.3" and "192.168.1.254".
Click Start > Run on your computer in Windows.
3
Type "cmd" in the dialog box.
4
Type "ipconfig" to show your computer's IP address. If your computer's IP address is not in the
5
correct range then see
address.
After you've set your computer's IP address, open a web browser such as Internet Explorer and
6
type "192.168.1.2" as the web address in your web browser.
See Chapter 5 on page 49
48
DESCRIPTION
The subnet mask specifies the network number portion of an IP address. Your NBG-
417N will automatically calculate the subnet mask based on the IP address that you
assign. Unless you are implementing subnetting, use the subnet mask computed
by the NBG-417N.
Click Apply to save your changes to the NBG-417N.
Click Reset to reload the previous configuration for this screen.
for information on the configuring your wireless network.
(145), Logs (149), Tools
Appendix C on page 193
for a tutorial on setting up a network with an AP.
(151), Sys OP Mode (156)
for information on changing your computer's IP
and Language (159) for
NBG-417N User's Guide