Control Center Administration - Symantec 10490452 - Mail Security 8220 Administration Manual

Control Center administration

Configuring, enabling and scheduling Scanner replication
■
SMTP host
■
System locale
■
You access the Control Center via a Web browser. By default anyone with the
correct address and logon information has access from any host. You can choose
to limit host access to the Control Center if you wish. Users attempting to log
into the Control Center from unauthorized computers will see a 403 Forbidden
page in their Web browser. Reverse Domain Name Server (DNS) lookup must be
enabled in your DNS software for this feature to work with host names.
When entering host names, there is a possibility that a name can be entered
incorrectly. If it is the only name on the list, you have effectively blocked
yourself all access to the Control Center. See the procedure below for help
resolving this situation.
Specify Control Center access or reset Control Center access
Follow these instructions to specify Control Center access or to regain access to
the Control Center.
To specify Control Center access
1 In the Control Center, click Settings > Control Center.
2 Check All hosts to allow any host access to the Control Center.
3 Check Only the following hosts to assign specific hosts to access the Control
Center.
All other hosts are rejected after you add one or more hosts to the list.
Add and Delete buttons are available to help you manage the list of allowed
hosts.
4
To add a host, type host name, IP address, IP address with subnet mask, or
Classless Inter-Domain Routing (CIDR) netblock and click Add.
Specify additional computers or networks as needed.
5
Click Save to store the current settings.
To regain access to the Control Center when no host name matches the list
1 Log in to the MySQL Control Center.
2 Select the Brightmail database.
use brightmail;
Configuring system settings
Configuring Control Center settings
41