Table of Contents
Advertisement
Video System Selection
Press the MENU button to display the On-Screen Menu.
1
Use the Point
to the AV System Menu icon.
2
Use the Point
to the desired system and then press the SELECT button.
Video Jack or S-Video Jack
Auto
The projector automatically detects an incoming video system,
and adjusts itself to optimize its performance.
PAL/SECAM/NTSC/NTSC4.43/PAL-M/PAL-N
If the projector cannot reproduce proper video image, select
a specific broadcast signal format from among PAL, SECAM,
NTSC, NTSC 4.43, PAL -M, and PAL -N.
Y, Pb/Cb, Pr/Cr Jacks
Auto
The projector automatically detects an incoming video signal,
and adjusts itself to optimize its performance.
When the Video System is 1035i or 1080i, select the system
manually.
COMPONENT VIDEO SIGNAL FORMAT
If the projector cannot reproduce proper video image, select a
specific component video signal format from among 480i, 575i,
480p, 575p, 720p, 1035i, and 1080i.
Note:
• The AV System menu cannot be selected when selecting
RGB(Scart).
40
Video Input
buttons to move the red frame pointer
buttons to move the red arrow pointer
AV SYSTEM MENU (VIDEO OR S-VIDEO)
AV System Menu icon
The selected system is displayed
Move the pointer to the desired
system and press the SELECT button.
AV SYSTEM MENU (COMPONENT VIDEO)
AV System Menu icon
The selected system is displayed.
Move the pointer to the desired
system and press the SELECT button.
Advertisement
Table of Contents
