Remote Control Code - Sanyo PLC-XF47K Owner's Manual

Hide thumbs Also See for PLC-XF47K:

Table of Contents

Part Names and Functions

Remote Control Code

The eight different remote control codes (Code 1–Code 8) are assigned to this projector. Switching the remote

control codes prevents interference from other remote controls when several projectors or video equipment

next to each other are operated at the same time. Change the remote control code for the projector first before

changing that for the remote control. See "Remote control" in the Setting Menu on page 50.

Check the Reset Switch to "Use position" in the

compartment lid on the back of the remote control.

During holding down the MENU button, press the

IMAGE ADJ. button corresponding times to the

number of the remote control code for the projector.

Remote Control Code

Code 1

Code 2

Code 3

Code 4

Code 5

Code 6

Code 7

Code 8

Number of Times

Pressing IMAGE ADJ.

button

Use position

Reset position

Reset switch

MENU button

IMAGE ADJ.

button

Table of Contents

Plc-xf47