Table of Contents
Advertisement
Safety Instructions
Moving the Projector
For safety, be sure to hold Carrying Handles on
both sides by 2 or more people when moving
a projector. Moving it improperly may result in
damage of cabinet or person's injury.
Replace lens cap and retract feet to prevent
damage to lens and cabinet.
1
Pull up lock buttons on each side of carrying
handles to release locks.
2
Pull carrying handles out fully until the handles
click. Move a projector by holding two handles by
2 or more people.
3
To retract carrying handles, pull up lock buttons
to release lock of handles and press handles fully
in until the handles are locked.
CAUTION IN CARRYING OR
TRANSPORTING THE PROJECTOR
– Do not drop or bump the projector, otherwise
damages or malfunctions may result.
– When carrying the projector, use a suitable
carrying case.
– Do not transport the projector by courier or any
other transport service in an unsuitable transport
case. This may cause damage to the projector. For
information about transporting the projector by
courier or any other transport service, consult your
dealer.
– Do not put the projector in a case before it is
cooled enough.
8
CARRYING
HANDLE
LOCK BUTTONS
Pull up lock buttons to
release lock.
Advertisement
Table of Contents
