System Information - Foxconn G41MX Series User Manual

System Information

This sub-menu is used to set up the standard BIOS features, such as the date, time, floppy drive
and so on. Use the arrow up/down keys to select an item, then use the <+> or <-> keys to change
the setting.
CMOS Setup Utility - Copyright (C) 1985-2008, American Megatrends, Inc.
System Time
System Date
► Primary IDE Master ► Primary IDE Master
► Primary IDE Slave ► Primary IDE Slave
► Secondary IDE Master ► Secondary IDE Master
► Secondary IDE Slave ► Secondary IDE Slave
► Third IDE Master ► Third IDE Master
► Third IDE Slave ► Third IDE Slave
Floppy A
Halt On
Keyboard Keyboard
Mouse Mouse
Floppy Floppy
Model Name
BIOS Version
↑↓←→:Move Enter:Select
► System Time
This item allows you to configure the desired time. Use [ENTER], [TAB] or [SHIFT-TAB] to
select a field. Use [+] or [-] to input the value.
The three fields of the setting are <hour> : <minute> : <second> respectively.
► System Date
<weekday><month><date> <year> format.
Day—weekday from Sun. to Sat., this message is automatically displayed by BIOS (Read
Only).
Month—month from 1 to 12.
Date—date from 1 to 31.
Year—year, set up by users.
Use [ENTER], [TAB] or [SHIFT-TAB] to select a field. Use [+] or [-] to input the value.
► Primary/Secondary/Third IDE Master/Slave
While entering setup, BIOS automatically detects the presence of IDE devices. This item
displays the drive information of IDE devices.
► Floppy A
This option allows you to select which kind of the Floppy Disk Drive is installed in your system.
It can be [360KB, 5
[Disabled].
► Halt On
This category determines whether or not the computer will stop if an error is detected during
powering up.
[All Errors] : All errors can result in system halt.
[All Errors But...] : All errors but keyboard or mouse or floppy can result in system halt. The
System Information
17
Time [17 : 33 : 49] [17 : 33 : 49]
[Thu , 09/18/2008]
[Not Detected]
[Not Detected]
[ATAPI CDROM]
[Hard Disk]
[Not Detected]
[Not Detected]
[1.44 MB 3
[All Errors, But ...]
[Disabled] [Disabled]
[Disabled] [Disabled]
[Disabled] [Disabled]
:G41MX/G41MX-K
:P01
+/-/:Value F10:Save ESC:Exit
1 / "], [1.2MB, 5 1 / "], [720KB, 3
4 4
halt condition can be enabled/disabled in the next three settings.
Use [Enter], [TAB]
or [SHIFT-TAB] to or [SHIFT-TAB] to
select a field.
Use [+] or [-] to
change system Time.
/ "]
1
2
F9:Optimized Defaults
1 / "], [1.44MB, 3
2
22
Help Item Help Item
F1:General Help
1 / "], [2.88 MB, 3 1
2
/ "] and
2