Integrated Peripherals - Foxconn G41MX Series User Manual

Integrated Peripherals

CMOS Setup Utility - Copyright (C) 1985-2008, American Megatrends, Inc.
► IDE Configuration ► IDE Configuration
► OnBoard Configuration ► OnBoard Configuration
► SuperIO Configuration ► SuperIO Configuration
► USB Configuration ► USB Configuration
↑↓←→:Move Enter:Select
► IDE Configuration/OnBoard Configuration/SuperIO Configuration/USB Configuration
Press <Enter> to go to relative submenu.
IDE Configuration
CMOS Setup Utility - Copyright (C) 1985-2008, American Megatrends, Inc.
IDE Configuration
SATA Controller
Configure SATA Channels
↑↓←→:Move Enter:Select
► SATA Controller
This item allows you to select the mode of the SATA ports. Setting values are: [Disabled],
[Compatible], [Enhanced].
► Configure SATA Channels
This item allows you to configure the location of SATA ports in "System Information" menu.
Setting values are: [Before PATA] and [Behind PATA]. When set to [Before PATA], SATA drives
are displayed as Primary IDE Master/Slave and Secondary IDE Master/Slave in "System
Information" menu; when set to [Behind PATA], SATA drives are displayed as Secondary IDE
Master/Slave and Third IDE Master/Slave in "System Information" menu.
Integrated Peripherals
[Press Enter] [Press Enter]
[Press Enter]
[Press Enter]
[Press Enter]
+/-/:Value F10:Save ESC:Exit
F9:Optimized Defaults
IDE Configuration
[Enhanced]
[Enhanced]
[Before PATA]
+/-/:Value F10:Save ESC:Exit
F9:Optimized Defaults
SATA drives are displayed as Secondary IDE
35
Help Item
Configure the IDE
device(s) .
F1:General Help
Help Item
Options
Disabled
Compatible
Enhanced
F1:General Help