Memory Timing Setting - Foxconn 720MX-K User Manual

Fox Intelligent Overclock
CPU Clock
PCIE Clock
↑↓→←:Move Enter:Select
► CPU Clock / PCIE Clock
These items allow you to select different CPU clock and PCIE clock.
► NPT FID Control (Appears only when CPU supports)
This is CPU multiplier. It allows you to configure CPU's speed much easier. This option will be
displayed only if your CPU is supporting this feature.

Memory Timing Setting

Timing Mode
x Memory Clock Value Limit
SPD Checksum Restart
CKE Base Power Down Mode
CKE Base Power Down
Memclock Tri-stating
Memory Hole Remapping
Auto Optimize Bottom IO
x Bottom of [31:24] IO Space
Bottom of UMA DRAM [31:24]
Memory Timing Setting
x TwTr Command Delay
x Trfc0 for DIMM0
x Trfc1 for DIMM1
x [Twr] Write Recovery Time
x [Trtp] Precharge Time
x [Trc] Row Cycle Time
x [Trcd] RAS to CAS R/W Delay
x [Trrd] RAS to RAS Delay
↑↓→←:Move Enter:Select
► Timing Mode
This item allows you to set the memory timing mode. The available options are:
[Auto]: System will detect the timing automatically;
[MaxMemCLK]: The memory timing is limited by the memory clock value set in the next item.
Phoenix - AwardBIOS CMOS Setup Utility
Fox Intelligent Overclock
[200]
200
[100]
+/-/PU/PD:Value
F5: Previous Values
Phoenix - AwardBIOS CMOS Setup Utility
Memory Timing Setting
[A uto]
Auto
DDR 400
[Ignore]
[Disabled]
[Per Channel]
[Disabled]
[Enabled]
[Enabled]
D0
[FC]
[Disabled]
3 Bus Clocks
195ns
195ns
6 Bus Clocks
3 Clocks
26 Bus Clocks
6 Clocks
5 Clocks
+/-/PU/PD:Value
F5: Previous Values
25
Item Help
Menu Level ►
F10:Save ESC:Exit F1:General Help
F7: Optimized Defaults
Item Help
Menu Level ►
Auto, no user limit
MaxMemCLK, limit by
memory clock value
F10:Save ESC:Exit F1:General Help
F7: Optimized Defaults