Table of Contents
Advertisement
Click Disk Management (under the Storage section).
The Initialize and Convert Disk Wizards appears. Click "Next" to continue.
The RAID array is named as Disk1 and its status is unknown and not Initialized.
8. A "Select Disks to Initialize" window will appear. The disks listed depend on how
many arrays you have configured. Select "Disk1" and click "Next" to continue.
9. When "Select Disks to Convert" window appears, do not select anything and click
"Next" to continue.
10. When the "Completing the Initialize and Convert Disk Wizard" window appears,
click "Finish" to complete the wizard.
99
Advertisement
Table of Contents
