Foxconn 720MX-K User Manual page 29

► SATA Channel 1/2/3/4 Master
When SATA Operation Mode is set to [IDE], These items will appear. The relationships
between SATA channels and SATA ports on the motherboard are :
SATA Channel 1 Master is the SATA port 1 of the motherboard.
SATA Channel 2 Master is the SATA port 2.
SATA Channel 3 Master is the SATA port 3.
SATA Channel 4 Master is the SATA port 4.
► Drive A
This option allows you to select which kind of the Floppy Disk Drive is installed in your system.
It can be [None], [360KB, 5.25 in], [1.2MB, 5.25 in], [720KB, 3.5 in], [1.44MB, 3.5 in] and
[2.88 MB, 3.5in].
► Halt On
This category determines whether or not the computer will stop if an error is detected during
powering up.
All Errors
No Errors
All, But Keyboard The system boot will not stop for a keyboard error; but it will stop
All, But Diskette
All, But Disk/Key
► Model Name
This item shows the marketing name.
► BIOS Version
This item shows the BIOS version.
► Memory
These are Display-Only information of the system memory, determined by POST(Power-On
Self-Test) of the BIOS.
► MAC Address
This item shows the MAC address.
► CPU Name
This item shows the CPU name installed in your system.
Whenever the BIOS detects a nonfatal error, the system will stop
and you will be prompted.
The system boot will not stop for any errors that may be
detected.
for all other errors.
The system boot will not stop for a diskette error; but it will stop
for all other errors.
The system boot will not stop for a keyboard or disk error, but it
will stop for all other errors.
22