Foxconn 720MX-K User Manual page 38

OnChip IDE Devices
OnChip IDE Channel
IDE DMA Transfer Access
SATA Controller
↑↓→←:Move Enter:Select
► OnChip IDE Channel
This option is used to enable/disable function of IDE drives connected to the PATA interface.
► IDE DMA Transfer Access
[Disabled] : to disable DMA transfers for all IDE drives. They will revert to PIO mode transfers.
[Enabled] : to enable DMA transfers for all IDE drives. The proper DMA mode will be detected
at boot-up. If the drive does not support DMA transfers, then it will use PIO mode instead.
Recommend leaving this BIOS feature at the default [Enabled] setting.
► SATA Controller
This option is used to enable/disable function of SATA drives connected to the SATA ports.
MCP SATA Mode
SATA Operation Mode
x SATA Pri-Master RAID
x SATA Pri-Slave RAID
x SATA Sec-Master RAID
x SATA Sec-Slave RAID
↑↓→←:Move Enter:Select
► SATA Operation Mode
This item is used to set the operating mode of your SATA ports. The available options are:
Phoenix - AwardBIOS CMOS Setup Utility
OnChip IDE Devices
[Enabled] Enabled
[Enabled]
[Enabled]
+/-/PU/PD:Value
F5: Previous Values
Phoenix - AwardBIOS CMOS Setup Utility
MCP SATA Mode
[IDE]
IDE
Disabled
Disabled
Disabled
Disabled
+/-/PU/PD:Value
F5: Previous Values
31
Item Help
Menu Level ►
F10:Save ESC:Exit F1:General Help
F7: Optimized Defaults
Item Help
Menu Level ►
F10:Save ESC:Exit F1:General Help
F7: Optimized Defaults