Energy Saving; Making Coffee; Selecting The Coffee Taste; Selecting The Quantity Of Coffee In The Cup - DeLonghi ESAM 04.120 Instructions For Use Manual

15min 30min
3. Press the ECO button to confirm the selection: auto-off is
programmed.
Please note:
To disconnect the appliance completely, place the main switch
at the back of the appliance in the 0 position (fig. 6).
SETTING THE TEMPERATURE
To modify the temperature of the water used to make the
coffee, proceed as follows:
1. With the appliance off and the main switch in the i posi-
tion (fig. 3), press the
the lights on the control panel come on.
2. Press the button to select the required tempe-
rature:
loW
3. Press the button to confirm the selection. The lights
go off.

ENERGY SAVING

use this function to enable or disable energy saving mode. en- en-
ergy saving mode reduces energy consumption in compliance
with current european regulations.
To activate or deactivate this mode, press the ECO button. after
a period of inactivity, if eCo mode is active the ECO button light
comes on.
This mode is active by default.
Please note:
a few seconds may elapse between energy saving mode and
delivery of the first coffee.

MAKING COFFEE

Selecting the coffee taste

Turn the dial (B9) to select the required taste. Turning it clock- (B9) to select the required taste. Turning it clock- to select the required taste. Turning it clock-
wise increases the quantity of coffee beans the appliance will
grind and therefore the strength of the coffee obtained.
1h 2h 3h
button and hold it down until
high
. Turning it clock- Turning it clock-
.
Please note :
• The first time you use the appliance, you will need to
make a number of coffees to identify the correct dial posi-
tion through trial and error.
• Make sure not to turn the dial too far clockwise, otherwise
the coffee may be delivered too slowly (a drop at a time),
particularly when making two cups of coffee.

Selecting the quantity of coffee in the cup

Select the required quantity of coffee (B8) by turning the dial:
Turning it clockwise increases the amount of coffee obtained.
Please note :
The first time you use the appliance, you will need to make a
number of coffees to identify the correct dial position through
trial and error.

Adjusting the coffee mill

The coffee mill is set by default to prepare coffee correctly and
should not require regulating initially.
however, if after making the first few coffees you find that the
coffee is either too weak and not creamy enough or delivery is
too slow (a drop at a time), this can be corrected by adjusting
the grinding adjustment dial (fig. 7).
Please note :
The grinding adjustment dial must only be turned when the
coffee mill is in operation.
10