Instructions; Description; Description Of The Appliance; Description Of Control Panel - DeLonghi ESAM 04.120 Instructions For Use Manual

environments;
• farm houses
• by clients in hotels, motels and other residential type en-
vironments
• bed and breakfast type environments.

INSTRUCTIONS

read these instructions carefully before using the appliance.
- Failure to respect these instructions may result in burns or
damage to the appliance.
The manufacturer is not liable for damage deriving from
failure to follow these instructions.
Please note:
if the appliance is passed to other persons, they must also be
provided with these instructions.

DESCRIPTION

Description of the appliance

(page 3 - a )
a1. grinding adjustment dial
a2. Main switch
a3. Beans container
a4. Beans container lid
a5. Pre-ground coffee funnel lid
a6. Compartment for measure
a7. Cup shelf
a8. Pre-ground coffee funnel
a9. Steam spout
a10. Cappuccino maker (removable)
a11. ring for selection CaPPuCCino/laTTe
a12. Steam nozzle (removable)
a13. Water tank
a14. Power cable
a15. Cup tray
a16. drip tray
a17. infuser door
a18. Coffee grounds container
a19. Coffee spout (adjustable height)
a20. Coffee guide
a21. infuser
a22. Control panel
a23. Measure
a24. descaler
a25. reactive strip to detect water hardness (Total hardness
test)

Description of control panel

(page 3 - B )
B1. button: turns the appliance on and off. (stand
by).
B2. Temperature oK or 1 cup coffee light
B3. button: to make 1 cup of coffee
B4. Temperature oK or 2 cup coffee light
B5. Tasto : to make 2 cups of coffee
B6. Temperature oK for steam light
B7. button: to select the steam function
B8. Coffee quantity selection dial (short, standard or long)
B9. Selection dial to choose the coffee taste (for a mild,
standard or strong coffee) or to use pre-ground coffee
.
B10. Steam dial/hot water
B11. light: no water or water tank not inserted
B12. light: grounds container full or missing
B13. light: general alarm
B14. rinsing or descaling button
B15. descaling light
B16. ECO energy saving mode button
B17. energy saving mode light

PRElIMINARY CHECKS

Checking the appliance

after removing the packaging, make sure the product is com-
plete and undamaged and that all accessories are present.
do not use the appliance if it is visibly damaged.
Contact Customer Service (see enclosed guarantee leaflet).

Installing the appliance

Important!
When you install the appliance, you should follow the follow-
ing safety warnings:
• The appliance gives off heat.
after positioning the appliance on the worktop, leave a
space of at least 3 cm between the surfaces of the appli-
ance and the side and rear walls and at least 15 cm above
the coffee maker.
• Water penetrating the appliance could cause damage.
do not place the appliance near taps or sinks.
• The appliance could be damaged if the water it contains
freezes.
do not install the appliance in a room where the tempera-
ture could drop below freezing point.
• Arrange the power cable in such a way that it cannot be
damaged by sharp edges or contact with hot surfaces
(e.g. electric hot plates).

Connecting the appliance

Important!
Check that the mains power supply voltage corresponds to the
value indicated on the rating plate on the bottom of the ap-
8