Multitech MT5634ZLX Owner's Manual page 20

MT5634ZLX Owner's Manual
9. Specify the driver's optional settings.
10. Press F10 to save to new configuration.
11. Highlight Install press here and press <Enter>
to install. The program copies the necessary
files for NetWare Client.
12. Continue the installation procedure to
completion. On completion, a new NET.CFG file
is created in your DOS directory. Typically, this
file contains the following lines:
Link Driver LM28ODI
FRAME Ethernet_802.3
#FRAME Ethernet_802.2
13. Copy the file CARDEN.EXE and LMVXD.386
from the directory \ENABLER on the Driver
diskette to the NetWare Client directory.
14. Use a text editor to edit the STARTNET.BAT for
adding a running CARDEN command at the
beginning of the file. A sample STARTNET.BAT
for the ODI workstation is shown next:
CARDEN /IOP=nnn /IRQ=n /COM=n /MIR=n
SET NWLANGUAGE=ENGLISH
LSL
LM28ODI
IPXODI
VLM
F:
LOGIN .ADMIN --Login to file server as user ADMIN
15. Run STARTNET to access the Novell network.
20
--(sets NetWare 4.X to English
language)
--Link Support Layer Module provided
by Novell
--Hardware Specific Module
--IPX Protocol Stack Module provided
by Novell
--DOS Support Module provided by
Novell
--Change to connected device