Multitech MultiModem
MT5634ZBA-V-V92 User Manual page 60

MultiModemZBA-V-V92 User Guide
Command: #CBFR Callback Failed Attempts Reset
Values:
Default:
Description:
Command:
Values:
Default:
Description:
Command: #CBN y = x Store Callback Password
Values:
Defaults:
Description:
Command: #CBP n Callback Parity
Values:
Default:
Description:
Command: #CBRy Callback Security Reset
Values:
Default:
Description:
n/a
n/a
Resets the number of failed callback passwords to 0. This does
not reset the number stored in nonvolatile memory. This
command can be used only after the setup password has been
entered and callback security enabled.
#CBI n Local Callback Inactivity Timer
n = 1–255
20
Sets the time (in minutes) that the modem waits for a command
before forcing the user to enter the setup password again. This
command can be used only after the setup password has been
entered and callback security has been enabled for local/
remote operation (#CBS1).
y = 0–29
x = password (6–10 characters)
None
Sets the callback security password for the y memory location.
The password must contain 6 to 10 characters, and cannot
include the + or - characters. This command can be used only
after the setup password has been entered and callback
security enabled.
n = 0, 1, or 2
0
Sets parity for the callback security messages. The parity of
the messages should match the parity of the computer the
modem is attached to. This command can be used only after
the setup password has been entered and callback security
enabled.
#CBP0 No parity.
#CBP1 Odd parity.
#CBP2 Even parity.
y = 0–29
None
Clears the password and phone number in the y memory
location. This command can be used only after the setup
password has been entered and callback security enabled.
6 Callback Security
63