Table of Contents
Advertisement
MultiModemZBA-V-V92 User Guide
5 Remote Configuration
To Change the Remote Escape Character
To further improve security, you can change a remote modem's remote configuration escape charac-
ter either locally or remotely. The remote configuration escape character is stored in register S9 . The
factory default is 37, which is the ASCII code for the percent character (%). Setting S9 to 0 (zero) dis-
ables remote configuration entirely.
CAUTION: If you do this remotely, you won't be able to change it back remotely.
1. Establish a remote configuration link with the remote modem as described in "Basic Procedure."
2. Type ATS9= n , where n is the ASCII code for the new remote configuration escape character,
and then press E
.
NTER
3. Save the new value by typing AT&W and pressing E
.
NTER
4. Type ATO and press E
to exit remote configuration.
NTER
48
Advertisement
Table of Contents
