Multitech MultiModem
MT5634ZBA-V-V92 User Manual page 41

MultiModemZBA-V-V92 User Guide
Command: +PMHT= n Modem on Hold Timer
Values:
Default:
Description:
Command: +PQC= n Quick Connect Control
Values:
Default:
Description:
+PMHR=11 Grant MOH request with 12 minute timeout
+PMHR=12 Grant MOH request with 16 minute timeout
+PMHR=13 Grant MOH request with indefinite timeout
+PMHR=? Displays the allowed values
+PMHR? Displays the currrent value
n = 0–13
0
Determines if the modem will accept a V.92 Modem on Hold
(MOH) request and will set the MoH timeout.
+PMHT=0 Deny MOH request
+PMHT=1 Grant MOH request with 10 second timeout
+PMHT=2 Grant MOH request with 20 second timeout
+PMHT=3 Grant MOH request with 30 second timeout
+PMHT=4 Grant MOH request with 40 second timeout
+PMHT=5 Grant MOH request with 1 minute timeout
+PMHT=6 Grant MOH request with 2 minute timeout
+PMHT=7 Grant MOH request with 3 minute timeout
+PMHT=8 Grant MOH request with 4 minute timeout
+PMHT=9 Grant MOH request with 6 minute timeout
+PMHT=10 Grant MOH request with 8 minute timeout
+PMHT=11 Grant MOH request with 12 minute timeout
+PMHT=12 Grant MOH request with 16 minute timeout
+PMHT=13 Grant MOH request with indefinite timeout
+PMHT=? Displays the allowed values
+PMHT? Displays the currrent value
n = 0, 1, 2, or 3
3
Controls the V.92 shortened Phase 1 and Phase 2 startup pro-
cedures (Quick Connect). When line conditions are stable,
quick connect results in shortened connect times; however, sig-
nificant fluctuation in line conditions from call to call can result in
longer connect times, in which case it may be advisable to dis-
able quick connect. The +PQC command is interactive with
S109.
+PQC=0 Enables Short Phase 1 and Short Phase 2 (Quick Connect)
+PQC=1 Enables Short Phase 1
+PQC=2 Enables Short Phase 2
+PQC=3 Disables Short Phase 1 and Short Phase 2
+PQC=? Displays the allowed values
+PQC? Displays the currrent value
4 AT Commands, S-Registers, & Result Codes
36