Basic Transmission; Programming The Scanner Button (From The Computer) - Oce im2020 User Manual

Using IP Scanner
3.3

Basic Transmission

Programming the scanner button (from the computer)

1
On the computer, start up IP Scanner.
"Start" → "Programs" → "IP Scanner" → "IP Scanner"
❍
2
Type in the IP address of the main device, and then click the [OK]
button.
❍ If the IP address of the main unit has been set, this operation is not
required.
IP Scanner
im2020, im2520, im2520f, im3520
3
3-21