Table of Contents
Advertisement
Using IP Scanner
Num
Item Name
ber
3
"Quality" box
4
"Contrast" slider
5
"File Format" box
6
"Specify File Name"
parameter
7
"File Name" box
8
"2in1" group box
9
"Original" group box Select whether the document is single-
IP Scanner
im2020, im2520, im2520f, im3520
Description
From the drop-down menu, select the
scanning resolution: "Text 200dpi (Fine)",
"Text 400dpi (Super Fine)", "Text 600dpi",
"Photo 200dpi (GSR)", "Photo 400dpi (S-
GSR)", "Photo 600dpi", "Text+Photo
200dpi", "Text+Photo 400dpi" or
"Text+Photo 600dpi".
Specify the scanning contrast.
From the drop-down menu, select the
format in which the file is saved: "TIFF-
MMR (Text)", "TIFF-MH (Photo)", "PDF-
MH (Photo)" or "PDF-MR (Text)".
Depending on whether the data is
encoded, some images may not viewed
on the computer.
In that case, select an MH setting to
improve the possibility of viewing the
image. An amount of encoded data exists
in image data; however, generally, MMR
has more than MH.
If "Yes" is selected, a specified file name
will be given to the image data when it is
saved.
If "No" is selected, the file will be saved
with a name consisting of the device name
and date that the image was scanned.
Type in the name that the file will be saved
with when
"Yes".
If "Yes" is selected, a two-page document
is scanned and filed as a one-page
scanned image.
Available only if an automatic document
feeder is used.
sided or double-sided. If "2 sided" is
selected, the location of the binding
margin and the document orientation can
be specified.
Specify File Name
3
is set to
3-9
Advertisement
Table of Contents
