Customising Settings; G User Programs - Sharp AL-1633 Operation Manual

CUSTOMISING SETTINGS

The user programs allow you to customise the machine to match your needs.
USER PROGRAMS
Program
Program name
number
1 Auto clear time
2 Preheat mode
Auto power shut-off
3
timer
4 Stream feeding mode
Auto power shut-off
5
setting
Auto paper select
8
*2
mode
9 Auto tray switching
10 to 15 Auditing mode
1
* On model with the SPF.
2
* On model with the two trays.
38
Setting codes
(factory default setting
appears in bold)
1: OFF
2: 10 sec.
3: 20 sec.
4: 60 sec.
5: 90 sec.
6: 120 sec.
1: 1 min.
2: 5 min.
3: 30 min.
4: 60 min.
5: 120 min.
6: 240 min.
1: 5 min.
2: 30 min.
3: 60 min.
4: 120 min.
5: 240 min.
0: OFF
*1
1: ON
0: OFF
1: ON
0: OFF
1: ON
0: OFF
*2
1: ON
–
(User programs)
Explanation
• "Auto clear time" automatically returns the
copy settings to the initial settings (p.15) when
a certain period of time elapses after a copy is
made. This program is used to select the
period of time. "Auto clear time" can also be
disabled.
• This function automatically switches the
machine to a low power consumption state if
the set duration of time elapses without the
machine being used when the power is on.
The POWER SAVE indicator (
however, the keys on the operation panel can
be used. Normal operation automatically
resumes when a key on the operation panel is
pressed, an original is placed, a print job is
received, or scanning is begun from a
computer.
• This function automatically switches the
machine to a state that consumes even less
power than preheat mode if the set duration of
time elapses without the machine being used
when the power is on. All lights except the
POWER SAVE indicator (
indicator ( ) go off. To resume normal
operation, press the [START] key (
Normal operation also resumes automatically
when a print job is received or scanning is
begun from a computer. While in auto power
shut-off mode, no keys (except the [START]
key ( )) can be used.
• When copying using the SPF, during the
period of time that the SPF indicator blinks
after an original has been scanned (about 5
seconds), a subsequent original can be placed
and automatically fed into the machine.
• Use this setting to enable or disable auto
power shut-off.
• This function automatically selects paper that
is the same size as the original placed in the
SPF, or the same size as that selected with
the [ORIGINAL SIZE ENTER] key (
function can be disabled.
• If the paper runs out during printing and there
is paper of the same size and orientation in
another tray, this function automatically
switches to that tray (excluding the bypass
tray). The function can be disabled.
See "AUDITING MODE SETTINGS" (p.41)
) lights up,
) and ON LINE
).
) The
ENTER