Sign in today to find solutions:

Don't have an account? Sign up

Sharp AL-1655CS Operation Manual

Sharp digital multifunctional system operation manual al-1655cs.

 
MODEL AL-1655CS
MODEL
AL-1655CS
DIGITAL MULTIFUNCTIONAL
SYSTEM
OPERATION MANUAL
PREPARATIONS
LOADING PAPER
MAKING COPIES
CONVENIENT COPY
FUNCTIONS
SETTING UP THE
SOFTWARE
PRINTER/SCANNER
FUNCTIONS
USER SETTINGS
TROUBLESHOOTING AND
MAINTENANCE
APPENDIX
Page
9
18
24
30
40
59
64
71
93
Next page ->

Summary of Contents

  • Page 1

    MODEL AL-1655CS MODEL AL-1655CS DIGITAL MULTIFUNCTIONAL SYSTEM OPERATION MANUAL PREPARATIONS LOADING PAPER MAKING COPIES CONVENIENT COPY FUNCTIONS SETTING UP THE SOFTWARE PRINTER/SCANNER FUNCTIONS USER SETTINGS TROUBLESHOOTING AND MAINTENANCE APPENDIX Page...

  • Page 2

    For customer assistance, please visit http://www.sharpusa.com/ (for USA) or http://www.sharp.ca/ (for Canada) on the World Wide Web or call 1-(630)378-3590 (for USA). Do not make copies of anything which is prohibited from copying by law. The following items are normally prohibited from copying by national law. Other items may be prohibited by local law.

  • Page 3

    COPYING MULTIPLE ORIGINALS ONTO A SINGLE SHEET OF PAPER (2 IN 1 copy) ... 35 CREATING MARGINS WHEN COPYING (Margin shift)... 38 5 SET UP THE SOFTWARE SOFTWARE FOR AL-1655CS ... 40 BEFORE INSTALLATION ... 41 INSTALLING THE SOFTWARE ... 42 SETTING UP BUTTON MANAGER ... 55...

  • Page 4

    6 PRINTER/SCANNER FUNCTIONS USING THE PRINTER MODE ... 60 BASIC PROCEDURE FOR PRINTING ... 60 USING THE SCANNER MODE... 61 SCANNING USING THE KEYS ON THE MACHINE ... 61 SCANNING FROM YOUR COMPUTER ... 62 OPERATION IN COPY, PRINTER, AND SCANNER MODES ... 62 HOW TO USE THE ONLINE MANUAL...

  • Page 5

    CAUTIONS Caution label on the machine The label ( ) in the fusing area of the machine indicates the following: : Caution, risk of danger : Caution, hot surface Cautions on using the machine Follow the cautions below when using this machine. Warning: •...

  • Page 6

    - whereas those parts which normally exceed the life of the product are not to be considered as spare parts. Consumables too, are available for 7 years following the termination of production. Trademark acknowledgements • Sharpdesk is a trademark of Sharp Corporation. ® • Microsoft , Windows ®...

  • Page 7

    When connecting the machine by USB 2.0 (Hi-Speed mode), be sure to read "System requirements for USB 2.0 (Hi-Speed mode)" (p.59) to verify that your system and the machine settings are configured appropriately. ® NERGY Partner, SHARP has determined that NERGY ® guidelines for energy...

  • Page 8

    INTRODUCTION Using the manual This machine has been designed to provide convenient copying features in a minimum amount of office space and with maximum operational ease. To get full use of all machine features, be sure to familiarize yourself with this manual and the machine.

  • Page 9

    MAIN FEATURES High-speed laser copying • First-copy time* at 300 dpi* • Copying speed is 16 copies per minute. This is ideal for business use and provides a big boost to workplace productivity. The copy time in the case when the power is turned on and copying using the document glass is started immediately after the power save indicator goes off (8-1/2"...

  • Page 10

    Laser printer function • Printer function The accompanying printer driver can be installed to enable use of the machine as a printer. • Network printer function A LAN connector is provided as a standard feature that allows the machine to be used as a network printer.

  • Page 11

    Chapter 1 PREPARATIONS This chapter provides basic information that you should know before using the machine. PART NAMES Document glass Operation panel Front cover Paper trays Side cover Side cover open button Bypass tray paper guides Paper output tray RSPF Reversing tray Exit area Bypass tray...

  • Page 12

    PREPARATIONS Operation panel [MODE SELECT] key / Mode indicators Press this key to select the mode. The indicator of the selected mode lights (copy, printer, scanner mode indicators). Display This shows messages indicating the machine status and any problems that occur, as well as user programs and function setting menus.

  • Page 13

    12 13 14 [COPY RATIO] key Press to select an enlargement or reduction ratio. To select a preset ratio setting, press the [COPY RATIO] key and select the desired preset ratio. To select a ratio that is not preset, press the [COPY RATIO] key, select the preset ratio that is closest to the desired ratio, and then press the [...

  • Page 14

    CHECKING PACKED COMPONENTS AND ACCESSORIES Open the carton and check if the following components and accessories are included. If anything is missing or damaged, contact our Technical Assistance Department at 1-(630)378-3590 in the USA or 905-568-7140 in Canada. If the machine does not function properly during setup or use, or if a Note function cannot be used, see "TROUBLESHOOTING AND MAINTENANCE"...

  • Page 15

    PREPARING THE MACHINE FOR INSTALLATION Be sure to hold the handles on both sides of the machine to unpack the machine and carry it to the installation location. Remove all pieces of tape shown in the illustration below and then open the RSPF and remove the protective materials. Take out the bag containing the TD cartridge.

  • Page 16

    INSTALLING THE TD CARTRIDGE Open the bypass tray, and then open the side cover. Remove the CAUTION tape from the front cover and remove the two protective pins from the fusing machine by pulling the strings upward one at a time. CAUTION tape Press gently on both sides of the front cover to open the...

  • Page 17

    While pushing the lock release button, gently insert the TD cartridge until it locks into place. Close the front cover and then the side cover by pressing the round projections near the side cover open button. When closing the covers, be Note sure to close the front cover securely and then close the side...

  • Page 18

    POWER ON AND OFF The power switch is located on the left side of the machine. If you use the machine in a country other than the country Warning where the machine was purchased, you will need to make sure that your local power supply is compatible with your model.

  • Page 19

    About the scan head The scan head lamp remains on constantly when the machine is in the ready condition (when the ready indicator is illuminated). The machine adjusts the scan head lamp periodically to maintain copying quality. At this time, the scan head moves automatically. This is normal and does not indicate machine trouble.

  • Page 20: Loading Paper

    The tray location indicator will blink when there is no paper in the selected paper tray, or when the selected paper tray is not closed or is improperly closed. PAPER For best results, use only SHARP recommended paper. Paper tray type Paper tray 1...

  • Page 21

    Before using special paper, contact a SHARP service center. G Before using other than SHARP recommended paper, make a test copy to see if the paper is suitable. LOADING THE PAPER TRAY 1 and 2...

  • Page 22

    LOADING PAPER Fan the paper and insert it into the tray. Make sure that the edges go under the corner hooks. • Do not load paper above the maximum height line ( Note Exceeding the line will cause a paper misfeed. •...

  • Page 23

    • When loading envelopes, make sure that they are straight and flat and do not have loosely glued construction flaps (not the closure flap). • Special papers such as SHARP recommended transparency film, labels, and envelopes must be fed one sheet at a time through the bypass tray.

  • Page 24

    LOADING PAPER Loading paper in the bypass tray • Paper must be fed narrow side first into the feed slot. Note • Special papers such as transparency film, labels, and envelopes must be fed one sheet at a time through the bypass tray. •...

  • Page 25

    CHANGING A TRAY'S PAPER SIZE SETTING Follow these steps to change a tray's paper size setting. • The paper size setting cannot be changed when the machine has Note stopped temporarily due to running out of paper or a misfeed. •...

  • Page 26: Making Copies

    Chapter 3 MAKING COPIES This chapter explains basic copying functions. NORMAL COPYING Using the document glass • The document glass can scan up to a 8-1/2" x 14" original. Note • When a copy is made, the edges will not be copied (image loss). For the image loss, see the "SPECIFICATIONS"...

  • Page 27

    Using the RSPF • Originals that are 5-1/2" x 8-1/2" to 8-1/2" x 14" and 14 lbs. to 24 lbs. Note to 90 placed at once. • Straighten curled originals before placing them in the document feeder tray. Curled originals may cause misfeeds. •...

  • Page 28

    MAKING COPIES Originals that cannot be used in the RSPF The following originals cannot be used. These may cause misfeeds or smudging and unclear images. • Transparencies, tracing paper, other transparent or translucent paper, and photographs. • Carbon paper, thermal paper. •...

  • Page 29

    Setting the number of copies Press the numeric keys to set the number of copies. The set number of copies appears in the display. A maximum of 99 copies can be set. If you wish to make only a single copy, copying is possible with the display showing "0".

  • Page 30

    MAKING A COPY DARKER OR LIGHTER Automatic exposure adjustment is initially enabled. This function automatically adjusts the copy image according to the original being copied. If you wish to select the exposure level yourself, follow the steps below. (Select from 2 original types and 5 exposure levels for each original type.) The exposure level used in automatic exposure adjustment can also be changed with "AE LEVEL ADJUST"...

  • Page 31

    REDUCTION/ENLARGEMENT/ZOOM Copies can be reduced down to 25% or enlarged up to 400%. (When the RSPF is being used, the zoom copy ratio range is 50% to 200%.) The [COPY RATIO] key can be pressed to quickly select a ratio from among eight preset ratios. In addition, the ] key ( ) and [ ] key (...

  • Page 32: Convenient Copy Functions

    Chapter 4 CONVENIENT COPY FUNCTIONS AUTOMATIC TWO-SIDED COPYING Two originals can be automatically copied onto both sides of a single sheet of paper. When the RSPF is used, two-sided copies of two-sided originals can easily be made. Document glass One-sided original Two sides RSPF...

  • Page 33

    Using the document glass Place the original that you wish to copy onto the front side of the paper on the document glass and close the RSPF. Press the [2-SIDED COPY] key until "1 TO 2" appears, and then press the [ENTER] key.

  • Page 34

    CONVENIENT COPY FUNCTIONS Using the RSPF Place the original(s) in the RSPF. (p.25) If you place an odd number of originals for one-sided to two-sided copying, the last page will be one-sided. Press the [2-SIDED COPY] key and select the two-sided copy mode that you wish to use.

  • Page 35

    SORT COPY Copies of multiple original pages can sorted into sets. The number of pages that can be scanned varies depending on the Note original type (photo, text, etc.) and the amount of memory allocated to the printer. The amount of memory allocated to the printer can be changed with "MEM.

  • Page 36

    CONVENIENT COPY FUNCTIONS Using the RSPF Place the originals. (p.25) • If "SORT AUTO SELECT" is enabled in the user programs, the default output Note mode for copying from the RSPF is sort mode (p.67). In this case go directly to step 4.

  • Page 37

    COPYING MULTIPLE ORIGINALS ONTO A SINGLE SHEET OF PAPER Multiple originals can be copied onto a single sheet of paper in a selected layout pattern. This function is convenient for compiling multi-page reference materials into a compact format, or for providing an overview of all pages of a document on a single page.

  • Page 38

    CONVENIENT COPY FUNCTIONS Press the [ select the original size and then press the [ENTER] key. The following original sizes can be selected: "8.5x14", "8.5x13", "8.5x11", "5.5x8.5", "A4", "B5", "A5" Select the number of copies and any other settings, and then press the [START] key ( "[START] : NEXT SCAN [#] : START PRINT"...

  • Page 39

    Using the RSPF Place the originals. (p.25) Press the [E-SORT/SP.FUN] key until "2IN1" appears and then press the [ENTER] key. Press the [ ] key ( the "ON" position and then press the [ENTER] key. Press the [ ] key ( select the original size and then press the [ENTER] key.

  • Page 40

    CREATING MARGINS WHEN COPYING The margin shift function is used to automatically shift the text or image or the copy paper approximately 1/2". As shown below, LONG EDGE or SHORT EDGE can be selected. RSPF Document glass Original • This feature cannot be used with the 2 IN 1 feature. Note •...

  • Page 41

    Press the [ ] key ( the "ON" position and then press the [ENTER] key. Press the [ ] key ( select the margin position and then press the [ENTER] key. Select "LONG EDGE" or "SHORT EDGE". For the margin position, see the previous page. Select the number of copies and any other settings, and then press the [START] key ( The copy is delivered to the paper output tray.

  • Page 42

    Windows, some screen images may be different from those in this manual. • This manual refers to the CD-ROM that accompanied the machine simply as "CD-ROM". SOFTWARE FOR AL-1655CS The CD-ROM that accompanies the machine contains the following software: MFP driver Printer driver The printer driver enables you to use the printer function of the machine.

  • Page 43

    BEFORE INSTALLATION Hardware and software requirements Check the following hardware and software requirements in order to install the software. Computer type IBM PC/AT or compatible computer equipped with a USB 2.0* Windows 95, Windows 98, Windows Me, Windows NT Operating system* Workstation 4.0 (Service Pack 5 or later)* Professional* Home Edition*...

  • Page 44

    INSTALLING THE SOFTWARE • If you need to use a different connection method after installing the Note software using a USB or network connection, you must first uninstall the software (See "Removing the software" on page 79) and then install it using the new connection method. •...

  • Page 45

    To install all of the software, click the "Standard" button. To install particular packages, click the "Custom" button. If you selected "Standard", installation will begin. Go to step 12. If you clicked the "Custom" button, select the checkboxes of the software packages to be installed and then click the "Next"...

  • Page 46

    Caution regarding the Windows logo test or digital signature, be sure to click "Continue Anyway" or "Yes". When "The installation of the SHARP software is complete" appears, click the "OK" button. Begin the installation of Button Manager (if "Button Manager"...

  • Page 47

    "HI-SPEED". For information on switching the USB 2.0 mode, see Chapter 6, "PRINTER/SCANNER FUNCTIONS". Begin installation of the scanner driver. "SHARP AL-1655CS" will appear in the "Found New Hardware Wizard" dialog box. Select "Install the software automatically (Recommended)" and click the "Next" button. Follow the on-screen instructions.

  • Page 48

    SET UP THE SOFTWARE Begin installation of the printer driver. "SHARP AL-1655CS" will appear in the "Found New Hardware Wizard" dialog box. Select "Install the software automatically (Recommended)" and click the "Next" button. Follow the on-screen instructions. If you are running Windows 2000/XP and a warning message appears...

  • Page 49

    Insert the cable into the USB connector on the machine. Insert the other end of the cable into your computer's USB port. Using the machine as a network printer • Interface cables for connecting the machine to your computer are not Note included with the machine.

  • Page 50

    SET UP THE SOFTWARE Double-click the "setup" icon ( If the language selection screen appears after you double click the Note "setup" icon, select the language that you wish to use and click the "Next" button. (Normally the correct language is selected automatically.) The "SOFTWARE LICENSE"...

  • Page 51

    The printer or printers connected to the network will be detected. Click the printer to be configured (the machine) and click the "Next" button. • The "Ethernet Address" is indicated on the left side of the machine Note near the LAN connector. •...

  • Page 52

    SET UP THE SOFTWARE Click the "Yes" button. Go to step 11 on page 51. LPR (TCP/IP) direct printing After step 1-7 on page 47-48 Click the "Printer Driver" button. If you have not set the IP Address, click the "Set the IP Address"...

  • Page 53

    The printer or printers connected to the network will be detected. Click the printer to be configured (the machine) and click the "Next" button. If the machine's IP address cannot be found, make sure the machine is Note powered on, make sure the network cable is connected correctly, and then click the "Search"...

  • Page 54

    Caution regarding the Windows logo test or digital signature, be sure to click "Continue Anyway" or "Yes". When "This installation of the SHARP software is complete" appears, click the "OK" button. When the "Finish" screen appears, click the "Close" button.

  • Page 55

    The "SOFTWARE LICENSE" window will appear. Make sure that you understand the contents of the software license, and then click the "Yes" button. Click the "Printer Driver" button. Read the message in the "Welcome" window and then click the "Next" button. Select "Shared Printer"...

  • Page 56

    SET UP THE SOFTWARE For the port to be used, select the machine set as a shared printer, and click the "Next" button. You can also click the "Add Network Port" button and select the printer to be shared (the machine) by browsing the network in the window that appears.

  • Page 57

    Windows XP Click the "start" button, click "Control Panel", click "Printers and Other Hardware", and then click "Scanners and Cameras". Click the "SHARP AL-1655CS" icon and select "Properties" from the "File" menu. In the "Properties" screen, click the "Events" tab.

  • Page 58

    Repeat Steps 4 through 6 to link Button Manager to "SC2:" through "SC6:". Select "SC2:" from the "Select an event" pull-down menu. Select "Start this program", select "Sharp Button Manager B" from the pull-down menu, and then click the "Apply" button. Do the same for each ScanMenu through "SC6:".

  • Page 59

    Note click "view all Control Panel options". Select "SHARP AL-1655CS" and click the "Properties" button. In Windows Me, right click "SHARP AL-1655CS" and click "Properties" in the pop-up menu. In the "Properties" screen, click the "Events" tab. Select "SC1:" from the "Scanner events"...

  • Page 60

    Repeat Steps 5 through 7 to link Button Manager to "SC2:" through "SC6:". Select "SC2:" from the "Scanner events" pull-down menu. Select "Sharp Button Manager B" in "Send to this application" and click the "Apply" button. Do the same for each ScanMenu through "SC6:".

  • Page 61: Printer/scanner Functions

    Chapter 6 PRINTER/SCANNER FUNCTIONS The machine includes a USB connector and a LAN connector as standard equipment. When the USB connector is used, the printer and scanner functions can be used. When the LAN connector is used, the printer function can be used. The machine has the following features: •...

  • Page 62

    USING THE PRINTER MODE The procedure for loading paper for printing is the same as for loading copy paper. See "LOADING PAPER" (p.18). • Print jobs received while the machine is copying will be stored in Note memory. When the copy job is finished, the print jobs will begin printing.

  • Page 63

    USING THE SCANNER MODE The procedure for placing the original is the same as for copying. See "NORMAL COPYING" (p.24). Scanner mode cannot be used at the following times: Note • A misfeed has occurred (paper misfeed or original misfeed in the RSPF).

  • Page 64

    PRINTER/SCANNER FUNCTIONS Button Manager scan menu For information on Button Manager settings, see the Button Manager help file. The names in the Button Manager menu ("xxxx" in "SC1:xxxx", etc.) can be changed. See the online manual. SCANNING FROM YOUR COMPUTER The machine supports the TWAIN standard, making it possible to scan from TWAIN- compliant applications.

  • Page 65

    HOW TO USE THE ONLINE MANUAL The online manual provides detailed instructions for operating the unit as a printer and scanner. It also provides methods for dealing with printing or scanner problems. To access the online manual, your computer must have Acrobat Reader 5.0 or later. If this is not installed, refer to "Installing Acrobat Reader"...

  • Page 66: User Settings

    Chapter 7 USER SETTINGS The user settings allow you to customize machine settings to better meet your needs. USER PROGRAMS The user settings consist of the following items. To change a user program setting, see "SELECTING A SETTING FOR A USER PROGRAM"...

  • Page 67

    Program Program name number AUTO SHUT-OFF TIME STREAM FEEDING 1: ON LAYOUT IN 2IN1 OFFSET FUNCTION ROTATE ORIG. IMAGE Setting codes (factory default setting appears in bold) • This function automatically switches the machine to a state that consumes even less power than preheat mode if the set duration of time elapses without the machine being used when...

  • Page 68

    USER SETTINGS Program Program name number AE/TEXT RESOLUTION 2-SIDED COPY MODE MARGIN WIDTH MEM. FOR PRINTER AUTO KEY REPEAT KEY PRESS TIME KEY TOUCH SOUND Setting codes (factory default setting appears in bold) • This setting is used to change the copy resolution in AUTO and TEXT mode from 600 x 1: 300dpi...

  • Page 69

    Program Program name number SOUND AT DEFAULT TONER SAVE MODE AE LEVEL ADJUST LANGUAGE RESET FACTORY SORT AUTO SELECT Setting codes (factory default setting appears in bold) • Use this to sound a beep 1: ON when a base setting is 2: OFF selected.

  • Page 70

    USER SETTINGS Print mode Program Program name number FORCED OUTPUT USB 2.0 MODE SWITCH * AUTO TRAY SWITCH The scanning speed increases when the USB 2.0 mode is set to "HI-SPEED", however, the printing speed does not increase considerably. Setting codes (factory default setting appears in bold)

  • Page 71

    SELECTING A SETTING FOR A USER PROGRAM Press the [MENU] key and then press the [ENTER] key. In printer mode, the user programs are accessed by simply pressing the [MENU] key. Press the [ ] key ( select the item that you wish to configure in the USER PROGRAM items, and then press the [ENTER] key.

  • Page 72

    USER SETTINGS Audible signals (key entry beep, invalid key beep, base setting beep) The machine sounds three different types of beep signals: a key entry beep that sounds when a valid key is pressed, an invalid key beep that sounds when an invalid key is pressed, and a base setting beep that sounds when a setting is the same as the base setting (base settings are explained below).

  • Page 73: Troubleshooting And Maintenance

    When the following indicators light up or blink on the operation panel or the following alphanumeric codes appear in the display, solve the problem immediately referring to both the table below and the indicated page. Note Be sure to use only genuine SHARP parts and supplies. Indication Lamp indicator Tray...

  • Page 74

    TROUBLESHOOTING AND MAINTENANCE Indication Lamp indicator Blinks Error indicator Steadily MEMORY FULL, PRESS START TO RESUME. NO 2-SIDED COPY FROM BYPASS TRAY. NO 2IN1 COPY FROM BYPASS TRAY. NO 2IN1 COPY WITH MARGIN SHIFT. COPY RATIO CAN NOT BE CHANGED IN 2IN1. THIS MENU IS NOT SELECTABLE WITH DATA.

  • Page 75

    TROUBLESHOOTING THE MACHINE The following problems are related to the general operation of the machine and copying. Problem The machine does not operate. Copies are too dark or too light. Blank copies. Cause and solution The machine is not plugged into a power outlet.

  • Page 76

    TROUBLESHOOTING AND MAINTENANCE Problem Part of the image is cut off or there is too much blank space. Wrinkles appear in the paper or the image disappears in places. Copies are smudged or dirty. Cause and solution The original was not placed in the correct position.

  • Page 77

    Problem Paper misfeed. White or black lines appear on copies. TROUBLESHOOTING AND MAINTENANCE Cause and solution Misfeed occur. → → → → To remove the misfeed, see "MISFEED REMOVAL". The paper is outside of the specified size and weight range. →...

  • Page 78

    TROUBLESHOOTING AND MAINTENANCE Problem Paper size for a paper tray cannot be set. A copy job stops before it is finished. The power save indicator is lit. Error indicator ( lit or blinking. Lighting fixture flickers. Cause and solution Copying or printing is performed. →...

  • Page 79

    PROBLEMS DURING SETUP OF THE SOFTWARE If the software does not install correctly, check the following items on your computer. To remove the software, see "Removing the software" (p.79) MFP driver cannot be installed (Windows 2000/XP) If the MFP driver cannot be installed in Windows 2000/XP, follow these steps to check your computer's settings.

  • Page 80

    TROUBLESHOOTING AND MAINTENANCE Plug and play screen does not appear (USB only) If the Plug and Play screen does not appear after you connect the machine to your computer with a USB cable and turn on the machine, follow the steps below to verify that the USB port is available.

  • Page 81

    Click "Add or Remove Programs". In Windows 95/98/Me/NT 4.0/2000, double-click the "Add/Remove Programs" icon. Select "SHARP AL-1500/1600CS Series MFP Driver" and Button Manager from the list, and remove the software. For more information, refer to your operating manual or to the help files for your operating system.

  • Page 82

    MISFEED REMOVAL When a misfeed occurs, the error indicator blinks, "CLEAR PAPER JAM" appears in the display, and the machine stops operating. If a misfeed occurs when using the RSPF, "RETURN X ORIGINAL(S) START TO RESUME" will appear in the display. ("X"...

  • Page 83

    A: Misfeed in the paper feed area Gently remove the misfed paper from the paper feed area as shown in the illustration. If the error indicator blinks and the misfed paper is not visible in the paper feed area, pull out the paper tray and remove the misfed paper.

  • Page 84

    TROUBLESHOOTING AND MAINTENANCE Gently remove the misfed paper from under the fusing unit as shown in the illustration. If the paper cannot be removed, proceed to "C: Misfeed in the transport area". The fusing unit is hot. Do not touch the fusing unit when Warning removing misfed paper.

  • Page 85

    Raise the fusing unit release lever, close the front cover and then close the side cover by pressing the round projections near the side cover open button. The error indicator will go out and the ready indicator will light up. When closing the covers, be sure to close the front cover securely and Caution then close the side cover.

  • Page 86

    TROUBLESHOOTING AND MAINTENANCE (C) If the original does not move easily into the exit area, remove it in the direction of the arrow while rotating the roller. Open and close the RSPF to clear the error indicator. "RETURN X Note ORIGINAL(S) START TO RESUME"...

  • Page 87

    TD CARTRIDGE REPLACEMENT When toner is low, the error indicator will light up and "TD CARTRIDGE IS NEAR EMPTY." will appear in the display. For information on purchasing a new TD cartridge, see "ABOUT SUPPLIES AND OPTIONS" (p.92). If copying is continued while the indicator is lit, copies will gradually become lighter until the toner runs out.

  • Page 88

    TROUBLESHOOTING AND MAINTENANCE Remove the TD cartridge from the bag. Remove the protective paper. Hold the cartridge on both sides and shake it horizontally four or five times. Hold the tab of the protective cover and pull the tab to your side to remove the cover. While pushing the lock release button, gently insert the TD cartridge until it locks into place.

  • Page 89

    DRUM CARTRIDGE REPLACEMENT The useful life of the drum cartridge is approximately 18,000 copies*. When the internal counter reaches approximately 17,000 copies, the error indicator will light up and "A DRUM CARTRIDGE WILL BE NEEDED SOON" will appear in the display. For more information on purchasing a drum cartridge, see "ABOUT SUPPLIES AND OPTIONS"...

  • Page 90

    TROUBLESHOOTING AND MAINTENANCE Close the front cover and then the side cover by pressing the round projections near the side cover open button. The drum replacement required error indicator will go out and the ready indicator will light up. When closing the covers, be sure to close the front cover securely and Note then close the side cover.

  • Page 91

    CLEANING THE MACHINE Proper care is essential in order to get clean, sharp copies. Be sure to take a few minutes to clean the machine on a regular basis. Do not spray flammable cleaner gas. Gas from the spray may...

  • Page 92

    TROUBLESHOOTING AND MAINTENANCE TD cartridge and drum cartridge Remove the TD cartridge and drum cartridge as explained in "TD CARTRIDGE REPLACEMENT" (p.85) and "DRUM CARTRIDGE REPLACEMENT" (p.87). Wipe the parts of the TD cartridge and drum cartridge shown below with a clean cloth. Wipe only the parts that are indicated in the illustration.

  • Page 93

    Transfer charger Turn the power switch off. (p.17) Ensure that the bypass tray is open and then open the side cover while pressing the side cover open button. (p.80) Take the charger cleaner out by holding the tab. Set the charger cleaner onto the right end of the transfer charger, gently slide the cleaner to the left end, and then remove it.

  • Page 94

    Note Be sure to use only genuine SHARP parts and supplies. For best copying results, be sure to use only SHARP Genuine Supplies which are designed, engineered, and tested to maximize the life and performance of SHARP copiers. Look for the Genuine Supplies label on the toner package.

  • Page 95: Appendix

    (one-sided copying at 100% copy ratio) Continuous copy First-copy time* Warm-up time* Copy ratio Exposure system Paper feed AL-1655CS Digital Multifunctional System, Desktop OPC drum Fixed Dry, electrostatic transfer Sheets, bound documents Max. 8-1/2" x 14" Max. 8-1/2" x 14"...

  • Page 96

    APPENDIX Fusing system Developer system Light source Resolution Gradation Power supply Power consumption Max. 1.0 kW Overall dimensions (with bypass tray folded) Weight* Dimensions Operating conditions Noise level Emission concentration (measured according to RAL- UZ62: Edition Jan. 2002) The copy time in the case when the power is turned on and copying using the document glass is started immediately after the power save indicator goes off (A4, paper fed from paper tray).

  • Page 97

    16 ppm Resolution 600 dpi Memory Approx. 10 MB Emulation SPLC (Sharp Printer Language with Compression) 10BASE-T Network Interface* Interface USB 2.0 (Full-Speed/Hi-Speed compatible interface) [USB cable] USB cable that supports USB 2.0. Please purchase a commercially available USB cable.

  • Page 98

    Void area Interface cables Scanner utilities As a part of our policy of continuous improvement, SHARP reserves Note the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units. There may be some deviations from these values in individual units.

  • Page 99

    SHARP’S Licensors and any other proprietary legends of SHARP and/or its Licensors that were on the original copy of the Software. You may also transfer all your license rights in the software, the backup copy of the Software, the related documentation and a copy of this License to another party, provided the other party reads and agrees to the terms and conditions of this License.

  • Page 100

    Clause 6. A disk will be replaced when it is returned to SHARP or a SHARP authorized representative with a copy of the receipt. SHARP will have no responsibility to replace a disk damaged by accident, abuse or misapplication.

  • Page 101

    Credit Card Number (should it be required). How Exchange is Obtained A replacement unit in exchange for your copier is provided directly by Sharp to any U.S. location. You will be required to provide consent for acceptance of an exchange unit and provide credit card authorization for the value of the exchange unit and the outbound shipping cost.

  • Page 102

    Sharp to the purchaser with respect to the Product, and shall constitute full satisfaction of all claims, whether based on contract, negligence, strict liability or otherwise. In no event shall Sharp be liable, or in any way responsible, for any damages or defects in the Product which were caused by repairs or attempted repairs performed by anyone other than an authorized servicer.

  • Page 111

    1.PRODUCT AND COMPANY IDENTIFICATION Product Name : AL-1651CS / AL-1661CS / AL-1631 / AL-1641CS / AL-1217D / AL-1457D / FO-DC550 / FO-55ND/AL-1655CS (Black Toner) Supplier Identification : Sharp Corporation 22-22 Nagaike-cho, Abeno-ku, Osaka, Japan Local suppliers are listed below. Please contact the nearest supplier for additional information.

  • Page 112

    3.HAZARDS IDENTIFICATION Most Important Hazards and Effects of the Products Human Health Effects : There are no anticipated carcinogenic effects from exposure based on animal tests Environmental Effects : No data are available. Specific Hazards Directive 1999/45/EC(Europe) : Not classified as dangerous 4.FIRST-AID MEASURES Route(s) of Entry : Inhalation? Inhalation...

  • Page 115

    1.PRODUCT AND COMPANY IDENTIFICATION Product Name : AL-1651CS / AL-1661CS / AL-1631 / AL-1641CS / AL-1217D / AL-1457D / FO-DC550 / FO-55ND /AL-1655CS(Black Developer) Supplier Identification : Sharp Corporation 22-22 Nagaike-cho, Abeno-ku, Osaka, Japan Local suppliers are listed below. Please contact the nearest supplier for additional information.

  • Page 116

    3.HAZARDS IDENTIFICATION Most Important Hazards and Effects of the Products Human Health Effects : There are no anticipated carcinogenic effects from exposure based on animal tests Environmental Effects : No data are available. Specific Hazards Directive 1999/45/EC(Europe) : Not classified as dangerous 4.FIRST-AID MEASURES Route(s) of Entry : Inhalation? Inhalation...

  • Page 117

    MATERIAL SAFETY DATA SHEET Exposure Limit Values OSHA-PEL(USA) ACGIH-TLV(USA) Personal Protective Equipment Respiratory Protection Hand Protection Eye Protection Skin Protection Other Protective Equipment 9.PHYSICAL AND CHEMICAL PROPERTIES Appearance Physical State : Solid Boiling / Melting Point Softening Point(°C) Flash Point(°C) Ignition Point(°C ) Explosion Properties Density(g/cm³)

  • Page 118

    Chronic Effect : In a study in rats of chronic inhalation exposure to a typical toner, a mild to moderate degree of lung fibrosis was observed in 92% of the rats in the high concentration (16mg/m group, and a minimal to mild degree of fibrosis was noted in 22% of the animals in the middle (4mg/m exposure group, the most relevant level to potential human exposures.

  • Page 119

    INDEX Symbols ] key... 31, 33, 36 ] key ... 10, 23, 28, 29, 31 ] key ... 10, 23, 28, 29, 31 2 IN 1 copying ... 35, 65 [2-SIDED COPY] key ... 10, 31, 32 About supplies and options ... 92 About the scan head ...

  • Page 120

    Initial settings... 16 Installation environment and usable software ... 41 Installing Acrobat Reader ... 63 Installing the software... 42 Installing the TD cartridge ... 14 Introduction... 6 IP address ... 48 Labels ... 18, 19, 21 Language setting ... 16 LAN connector...

  • Page 121

    Ready indicator ... 11,16, 71, 81, 82, 83 Recycled paper ... 18 Removing the software... 79 Reversing tray ... 9, 83 Roller ... 83 Roller rotating knob ... 82 ROPM... 59 RSPF ... 9, 25, 32, 34, 37, 83, 89 RSPF indicator ...

  • Page 122

    Preparations Installation the machine, preparing ... 13 Packed components and accessories, checking ... 12 Paper, loading - Bypass tray... 22 - Paper tray... 19 Power, turn off ... 17 Power, turn on ... 16 Scan head locking switch, releasing ... 13 TD cartridge, Installing ...

  • Page 123

    AL-1655CS SHARP ELECTRONICS CORPORATION Sharp Plaza, Mahwah, New Jersey 07430-1163. www.sharpusa.com SHARP CORPORATION This manual has been printed using a vegetable-based PRINTED IN CHINA soy oil ink to help protect the environment. 2004J Printed on 100% post-consumer recycled paper TINSE1396QSZZ...

  • Page 124

    Model Number: AL-1655CS Responsible Party: SHARP ELECTRONICS CORPORATION Sharp Plaza, Mahwah, New Jersey 07430-1163 TEL: 1-800-BE-SHARP This product utilizes tin-lead solder, and a fluorescent lamp containing a small amount of mercury.

Comments to this Manuals

Symbols: 0

Latest comments:

×

Select the desired size and copy embed code

Copy your embed code and put on your site: