G Loading Paper; G Changing A Tray's Paper Size Level; Setting; Loading The Paper Tray - Sharp AL-1633 Operation Manual

LOADING PAPER
Make sure that the machine is not copying or printing, and then follow these steps to load paper.

Loading the paper tray

1
Gently lift and pull out the paper tray
until it stops.
2
Push the pressure plate down until it
locks in place.
3
Fan the paper.
4
Load paper into the tray.
• Do not load paper higher than the line on
Note
the tray (up to 250 sheets).
• Make sure that the paper fits under the tabs
on the right side of the tray.
• Make sure the stack of paper is straight
before loading it. When adding paper, take
the remaining paper out and combine it into
a single stack with the new paper.
Push the centre of the
pressure plate down until
it locks into place.
If the paper is not fanned,
double-feeds or misfeeds
may occur.
BEFORE USING THE MACHINE
5
Gently push the paper tray into the
machine.
If you loaded a different size of paper than
Note
was loaded previously in the tray, go to
"CHANGING A TRAY'S PAPER SIZE
SETTING" (p.19).
1
17