Recording A Motion Picture; Displaying A Motion Picture; Rec. Mode - Sharp AQUOS LC-26GA3H Operation Manual

Using memory card

Recording a motion picture

Use this setting to record images you are currently
watching.
Record with the settings made in "Rec. Mode" and
"Pre-recording".
1
Press E REC to start recording.
• CARD indicator lights up red.
• Recording information displays in the lower
right corner of the screen.
2
Press E REC to stop recording.
NOTE
Broadcasting types or input signals not available for
recording:
1 COMPONENT input
2 Copy guarded signal
3 DVI-I input
To display the remaining record time.
Press DISPLAY while not recording.
• Remaining record time displays in the lower right corner
of the screen.
NOTE
• Do not press POWER on the TV while recording.
Recording cannot finish properly and may damage the
file.
• Recording stops if you press POWER on the remote
control while recording.
• When card has no capacity for recording, "Card is full"
displays and stops recording.
• You cannot change the channel or switch the input source
while recording.
Selecting Video mode
1
Press CARD and the card mode screen
displays.
2
Press c/d to select "Video", and then press
ENTER.
• When in CARD mode, press 0-9 or TV/VIDEO
to switch either TV or AV input mode.
38

Displaying a motion picture

1
Press CARD and the card mode screen
displays.
2
Press c/d to select "Video", and then press
ENTER.
3
Press a/b/c/d to select the file you want
to play, and then press ENTER.
• Video playback starts.
CARD - VIDEO
PLAY
MODE : SP
0 0 : 1 5 : 2 5
4
Press CARD again to display the operation
panel.
• See page 33 for the operation panel
information.
• When viewing a motion picture, by pressing
WIDE the picture size changes.
Small – Medium – Large.

Rec. Mode

Use this setting for recording images you are currently
watching. You can select the recording mode (picture
quality) for a motion picture.
1
Press CARD and the card mode screen
displays.
2
Press MENU and the MENU screen displays.
3
Press c/d to select "Card".
4
Press a/b to select "Video Setup" and then
press ENTER.
5
Press a/b to select "Rec. Mode", and then
press ENTER
Rec. Mode
Pre-recording
Repeat
Edit
6
Press a/b to select the desired mode, and
then press ENTER.
0001/0045 REPEAT:OFF
PLAY
SP
LP
EP