Tv (Rear) - Sharp AQUOS LC-26GA3H Operation Manual

Part names

TV (Rear)

INPUT 2 terminals
INPUT 1 terminals
SYSTEM RESET**
DC OUTPUT
* Press RESET if the TV cannot return to its original state after performing various operations.
This will reset the TV as shown below.
• AV MODE resets to USER.
• TV channel resets to channel 1.
• Dual screen resets to normal.
• Audio setting initialises.
• Dolby Virtual resets to Off.
• Image position is initialised.
** Press SYSTEM RESET if the TV does not operate after starting up.
NOTE
• Pressing RESET will not work if the TV is in standby mode (indicator lights red).
• Pressing RESET will not delete channel preset and password. See page 55 for resetting the password when you know it.
See page 64 for initialising to the factory preset values when you forget your password.
12
terminal
MONITOR OUTPUT terminals
INPUT 3 terminals
INPUT 4 terminals
SPEAKER terminals
CENTRE
CHANNEL INPUT
terminal
RS-232C terminal
RESET*
• Still image mode deactivates.
• Audio Out setting resets to Fixed.
• Centre Channel Input setting resets to Off.
• Audio Only setting resets to Off.
AC INPUT
terminal
Antenna input terminal