Copying Redial Numbers To Memory; Dialing A Number Stored In Memory While On-Hook; Dialing A Number Stored In Memory - RCA 1223 User Manual

5. Press the Store button to confirm and save, and wait for three seconds to
exit.
NOTE: If the name you want to enter is longer than 12 characters, only the
first 12 characters will be copied into memory.

Copying Redial Numbers to Memory

1. Press the Redial/Pause button while the phone is on-hook. The display
shows P I C K U P PHONE.
2. Press the Store button.
3. Press 0-9, A, B, or C for the memory lo cation. Press the Store button twice to
confirm the location and the number. The cursor flashes in the display and
you may enter the caller's name.
4. Press the Store button to confirm and save, and wait for three seconds to
exit .
NOTE: If you want to edit the number, press the Store button within three
seconds to enter the edit mode.

Dialing a Number Stored in Memory While On-hook

1. Press a line button.
2. To select a memory, press A, B, or C, or Dial and 0 - 9. The number in that
memory location displays.
NOTE: You may select a different memory location by pressing Review
or  buttons to scroll through the memories or press A, B, or C, or Dial and
0 - 9.
3. Press the Speaker button, or pick up the handset to dial the displayed
number.

Dialing a Number Stored in Memory

1. Press a Line button, and lift the handset,or press the Speaker button.
2. Press A, B, or C, or Dial and 0 - 9.
IMPORTANT: If you make test calls to emergency numbers, remain
on the line and explain the reason for the call. Also, make test calls in
off-peak hours, such as early morning or late evening.
23
