Changing A Stored Number; Erasing A Stored Number; Copying Caller Id Memories To User Memory; Storing A Redial Number To Memory - RCA 1113 User Manual

Changing a Stored Number

Repeat the storage sequence under "Storing a Name and Number in Memory",
and use the delete button to delete the old number before entering the new
number.

Erasing a Stored Number

1. Press the store button.
2. Press the memory location (0-9, A, B, C) to be erased.
3. Press the delete button

Copying Caller ID Memories to User Memory

1. Press the review
you want to copy.
2. Press the store button.
3. Press the memory location (0-9, A,B,C). The number flashes if there is a
number already stored in the memory location.
4. Press the store button to enter the edit mode, and then press the store
button again to edit the name.
NOTE: You may select a different memory location by pressing
review  or
number key (0-9, A, B, C).
5. Press the store button to confirm and save, and wait for three seconds to
exit.
NOTE: If the name you want to enter is longer than 12 characters,
only the first 12 characters will be copied into memory.

Storing a Redial Number to Memory

1. Press the store button.
2. Press any key (0-9, or quick call buttons A, B, or C) for the memory location.
If there is a number already stored in the memory location it will appear on
the display. Use the review
3. Press the store button again to confirm.
4. Press the redial button, and then press the store button again.
5. Enter name, if necessary, and then press the store button to confirm.
NOTE: If you want to edit the number, press the store button again
within three seconds. When you are finished, wait three seconds to
exit.
.
 or  buttons to view the caller number and name
 buttons to scroll through the memories or press a

or button to select a different location.
