Hold; Lacing A C All On H Old; Releasing A Call From Hold; Flash - RCA 25425 User Manual

NOTE: If Intercom Auto Answer is turned ON, the unit automatically answers the intercom
call even if the Do Not Disturb function is activated.

Hold

Placing a Call on Hold
Press the HOLD button to put the line in use on hold. The line indicator for the line on hold
flashes blue. The phone emits a beep every 30 seconds as a reminder. At the other stations,
the indicator blinks red but no beep is heard.
NOTE: If you put a call on HOLD while in PRIVACY mode, no one but you can access the line
on hold. Anyone trying to access the line receives an error tone.

Releasing a Call from Hold

Press the HOLD button or the corresponding LINE button to release hold.
NOTE: If you want to change modes, lift the handset to switch to the handset, or press the
HEADSET button to use the headset.
NOTE: The call on hold can be picked up at any station using this procedure.

Flash

Use the FLASH button to activate custom calling services such as call waiting or call for-
warding, which are available through your local phone company.

Redial

1. Pick up the handset (handset mode), or press the SPEAKER button (speakerphone
mode), or press the HEADSET button (headset mode) and the priority line is automati-
cally selected,
Press a line button to select other line.
2. Press the REDIAL/FORMAT button
NOTE: The redial function will not operate if the number to be redialed contains more than
32 digits. If the number is longer than that, you will hear an error tone.

Reviewing the Redial Numbers

Your phone records up to six previously dialed phone numbers.
1. When the phone is idle, press the REDIAL/FORMAT button.
2. Use the VOL (+ or -) buttons to scroll up or down to view the last six previously dialed
numbers.
3. While the preferred number is displayed, pick up the handset or press the SPEAKER,
DIAL, or a line button to dial the phone number.
OR
Basic Operation
1