Ultra Start G-Series Install Manual page 15

PAGE 15
Menu 4
Ignition 3x
On/Off
On/Off On
Setting 1* Tach/ Tachless
1) Tach 1 Flash/Honk
2) Tach-less 2 Flashes/Honks
Press & Release the Program Button 1 Time (Setting 1) Confirmed with 1 LED flashes.
Press & Hold the Program Button until the appropriate # of park lights/horn (optional) honks, then release.
Press & Release the Program Button to proceed to the next step.
Setting 2 Tach Adjustment
1) Decrease
2) Increase
Press & Release the Program Button 2 Times (Setting 2) Confirmed with 2 LED flashes.
Press & Hold the Program Button until the appropriate # of park lights/horn (optional) honks, then release.
Press & Release the Program Button to proceed to the next step.
Setting 3 Over-Crank Adjustment.
1) None
2) .250 adjustment
3) .500 adjustment
Press & Release the Program Button 3 Time (Setting 3) Confirmed with 3 LED flashes.
Press & Hold the Program Button until the appropriate # of park lights/horn (optional) honks, then release.
Press & Release the Program Button to proceed to the next step.
Setting 4 Tach Wait.
1) None
2) 500 seconds
3) 1.5 seconds
Press & Release the Program Button 4 Time (Setting 4) Confirmed with 4 LED flashes.
Press & Hold the Program Button until the appropriate # of park lights/horn (optional) honks, then release.
Press & Release the Program Button to proceed to the next step.
*Future Program Setting
.
Press and Press and
Release the Release the
Program
Button
(12 pin auxiliary connector pin 7).
Blue/White pin 7 Must be connected.
No connection Blue/White pin 7.
.
1 Flash/Honk
2 Flashes/Honks
1 Flash/Honk
2 Flashes/Honks
3 Flashes/Honks
1 Flash/Honk
2 Flashes/Honks
3 Flashes/Honks
Press and Release
the Program Button
# of Times for
button for
Setting Chosen
Menu 4
Decrease Start output by 5%
Increase Start Output by 5%
No over-crank adjustment.
250ms over-crank adjustment.
500ms over-crank adjustment.
No Tach wait.
500ms Tach wait..
1.500 seconds Tach wait
INSTALL GUIDE
Press and Hold
the Program Button
to Change Option