Ultra Start G-Series Install Manual page 11

PAGE 11
Menu 1 -
Setting 5 Horn Honk Output
1) All confirmation
2) Lock/ Unlock enabled 2 Flashes/Honks
3) 2nd Lock press
4) No Honks
Press & Release the Program Button 5 Times (Setting 5) confirmed 5 LED flashes.
Press & Hold the Program Button until the appropriate # of park light/horn (optional)honks, then release.
Press & Release the Program Button to proceed to the next step.
Setting 6 Horn Honk Timing
1) 10 ms Pulse Output
2) 5 ms Pulse Output
3) 50 ms Pulse Output
Press & Release the Program Button 6 Times (Setting 6) confirmed 6 LED flashes.
Press & Hold the Program Button until the appropriate # of park light/horn (optional)honks, then release.
Press & Release the Program Button to proceed to the next step.
continued...
(12 pin auxiliary connector pin 3)
1 Flash/Honk
3 Flashes/Honks
4 Flashes/Honks
(12 pin auxiliary connector pin 3)
1 Flash/Honk
2 Flashes/Honks
3 Flashes/Honks
Horn honk confirmation on all functions.
Horn honk confirmation on Lock/Unlock only
Horn honk confirmation on 2nd Lock press..
No honk confirmations.
Normal (regular) Horn Output Pulses.
Short (quiet) Horn Output Pulses.
Long (loud) Horn Output Pulses.
INSTALL GUIDE