Settings Menu - Epson Dreamio EH-TW450 User Manual

List of Functions
Sub Menu
Input Signal
Video Signal
Aspect
Reset

Settings Menu

Sub Menu
Keystone
Auto Keystone
Control Panel Lock
Power Consumption
You can select input signal from Computer input port.
If set to Auto the input signal is set automatically according to the connected equipment.
If colors do not appear correctly when set to Auto, select the appropriate signal according to the connected equipment.
You can select input signal from Video input port. If set to Auto, video signals are recognized automatically. If interference appears in the image or
a problem occurs such as no image is being projected when set to Auto, select the appropriate signal according to the connected equipment.
g
You can set the Aspect Ratio for projected images.s
You can reset all adjustment values on the Signal menu to their default settings, except for Input Signal.
To return all menu items to their default settings, see s
You can correct keystone distortion in the vertical directions.s Quick Start Guide
Turn On to perform Auto Keystone.
(Auto Keystone is only executed when Front is selected from the Extended - Projection menu.)
You can use this to restrict operation of the projector's Control panel.s
You can set the Lamp brightness to one of two settings.
Select ECO if the images being projected are too bright such as when projecting images in a dark room or onto a small screen. When ECO is
selected, the amount of electricity consumed and the lamp's operating life are changed as follows, and fan rotation noise during projection is
reduced. Electrical consumption: about 19% decrease, lamp life: about 1.3 times longer
Function
p.17
p.38
Function
p.21
33