Signal Menu - Epson Dreamio EH-TW450 User Manual

List of Functions

Signal Menu

Items that can be set vary depending on the image signal currently being projected as shown in the following screen shots. Setting details are saved for
each image signal.
Analog RGB
* When inputting signal from the HDMI input port
Sub Menu
Auto Setup
Resolution
g
Tracking
g
Sync.
Position
Progressive
HDMI Video Range
Digital RGB/RGB Video/
Component Video
You can select whether or not (On/Off) Auto Setup automatically adjusts the image to the optimum state when the Input Signal changes.
When set to Auto, the resolution of the input signal is automatically identified. If the images cannot be projected correctly when set to Auto, such
as when some of the image is missing, adjust to Wide depending on the connected computer for wide screens, or set to Normal for 4:3 or 5:4 screens.
You can adjust computer images when vertical stripes appear in the images.
You can adjust computer images when flickering, fuzziness, or interference appear in the images.
You can adjust the display Position up, down, left, and right when a part of the image is missing so that the whole image is projected.
(When component video or RGB video signal is input, this setting can only be adjusted when 480i/576i signals are being input. This cannot be set
when a digital RGB signal is input.)
Off: IP conversion is carried out for each field in the screen. This is ideal for viewing images with a large amount of movement.
g
On: Interlace (i) signal is converted to Progressive
(This cannot be set when a digital RGB signal is input)
When the projector's HDMI input port is connected to a DVD player and so on, the projector's video range is set according to the DVD player's
video range setting.
Component Video
*
g
Function
g
(p). Applies to still images.
g
Composite video
32
g g
/S-Video