Saving A User's Logo - Epson Dreamio EH-TW450 User Manual

Saving a User's Logo

You can save the image that is currently being projected as a User's Logo.
Once a User's Logo has been saved, the logo cannot be returned
q
to the factory default.
Procedure
A
Project the image you want to use as the User's Logo, and
then press the [Menu] button.
Using the Remote Control
B
Select Extended - User's Logo from the Configuration Menu.
"Using the Configuration Menu"
s
Check the buttons you can use and the operations they perform
in the guide under the menu.
Using the Control panel
p.30
• If User's Logo is selected when Keystone, Aspect, or Progressive
q
are being performed, the function currently being performed is
cancelled.
C
When "Choose this image as the User's Logo?" is displayed,
select "Yes".
When you press the [Enter] button on the Remote Control or the
q
Control panel, the screen size may change according to the signal
as it changes to the resolution of the image signal.
D
Move the box to select the part of the image to use as the
User's Logo.
62