Using The Oven Controls - GE JGSP28 Owner's Manual

Using the oven controls.

Throughout this manual, features and appearance may vary from your model.
Oven Control, Clock and Timer Features and Settings
BAKE/TEMP RECALL Pad
Touch this pad to select the bake function.
BAKE Light
Flashes while in edit mode—you can change
the oven temperature at this point. Glows
when the oven is in bake mode.
START/ON Pad
Must be touched to start any cooking or
cleaning function.
Display
Shows the time of day, oven temperature,
whether the oven is in the bake, broil or
self-cleaning mode and the times set for
the timer or automatic oven operations.
The display will show "PrE" while
preheating. When the oven reaches
the selected temperature, the oven
control will beep and the display
will show the oven temperature.
Function Error Code
If "F– and a number or letter" flash in the display and the
oven control signals, this indicates a function error code.
If the function error code appears during the self-cleaning
cycle, check the oven door latch. The latch handle may have
been moved, even if only slightly, from the latched position.
Make sure the latch is moved to the right as far as it will go.
Touch the CLEAR/OFF pad. Allow the oven to cool for
one hour. Put the oven back into operation. If the function
error code repeats, disconnect the power to the range and
call for service.
10
CONTROL LOCK/UNLOCK
PRESS + AND – AND HOLD FOR 3 SECONDS
KITCHEN TIMER ON/OFF Pad
Touch this pad to select the timer feature.
Then press + and – pads to adjust time.
TIMER Light
Flashes while in edit mode—you can change
the set time at this point. Glows when the
timer has been activated. Flashes again when
the time has run out until the control is reset.
CLOCK Pad
To set clock, touch this pad twice and then
touch the + and – pads. The time of day will
flash in display when oven is first turned on.
DELAY START Pad
Use along with the COOKING TIME or
SELF CLEAN pads to set the oven to start
and stop automatically at a time you set.
DELAY START Time Light
Flashes while in edit mode—you can change
the delay start set time at this point. Glows
when the function has been activated.
COOKING TIME Pad
Touch this pad and then touch the + or –
pads to set the amount of time you want
your food to cook. The oven will shut off
when the cooking time has run out.
COOKING TIME Light
Flashes while in edit mode—you can change
set time at this point. Glows when function
has been activated. Flashes again when the
time has run out until the control is reset.
AUTOMATIC OVEN Light
This lights anytime the oven has been
programmed using the COOKING TIME or
DELAY START functions.