GE JGSP22 Owner's Manual page 29

Problem
Food does not bake
or roast properly
Oven will not self-clean
"Crackling" or
"popping" sound
Excessive smoking
Oven door will not open Oven too hot.
after a clean cycle
Oven not clean after a
clean cycle
"LOCK DOOR" flashes
in the display
LOCKED DOOR light
is on when you want
to cook
Possible Causes
Oven controls
improperly set.
Shelf position is incorrect
or the shelf is not level.
Incorrect cookware or
cookware of improper
size being used.
Aluminum foil used
improperly in the oven.
Oven bottom not securely
seated in position.
Oven thermostat needs
adjustment.
The oven temperature is too
high to set a self-clean operation. reset the controls.
Oven controls
improperly set.
This is the sound of the
metal heating and cooling
during both the cooking and
cleaning functions.
Excessive soil.
Oven controls not properly set. • See the Using the self-cleaning oven section.
Oven was heavily soiled.
The self-clean cycle has
been selected but the
door is not closed.
The oven door is locked
because the temperature
inside the oven has not
dropped below the
locking temperature.
What To Do
• See the Using the oven section.
• See the Using the oven section.
• See the Using the oven section.
• See the Using the oven section.
• See the Care and cleaning of the range section.
• See the Adjust the oven thermostat—Do it yourself!
section.
• Allow the oven to cool to room temperature and
• See the Using the self-cleaning oven section.
• This is normal.
• Press the CLEAR/OFF pad. Open the windows to
rid the room of smoke. Wait until the LOCKED DOOR
light goes off. Wipe up the excess soil and reset the
clean cycle.
• Allow the oven to cool below locking temperature.
• Clean up heavy spillovers before starting the clean
cycle. Heavily soiled ovens may need to self-clean
again or for a longer period of time.
• Close the oven door.
• Press the CLEAR/OFF pad. Allow the oven to cool.
29