GE JGSP22 Owner's Manual page 28

Before You Call For Service (cont.)...
Troubleshooting Tips
Problem
Clock and timer
do not work
Oven light does not work
Oven temperature too
hot or too cold
Oven will not work
Control signals after
entering cooking time
or delay start
Display goes blank
Food does not
broil properly
28
Possible Causes
A fuse in your home may be
blown or the circuit breaker
tripped.
Oven controls
improperly set.
Light bulb is loose or defective. • Tighten or replace the bulb.
Plug on range is not completely • Make sure electrical plug is plugged into a live, properly
inserted in the electrical outlet.
Switch operating light
is broken.
Oven thermostat
needs adjustment.
A fuse in your home may be
blown or the circuit
breaker tripped.
Oven controls
improperly set.
You forgot to enter
a bake temperature
or cleaning time.
A fuse in your home may
be blown or the circuit
breaker tripped.
The clock is in the
black-out mode.
Oven door not closed.
Oven controls improperly set.
Improper shelf position
being used.
Cookware not suited
for broiling.
Aluminum foil used on the
broiling pan and grid has
not been fitted properly and
slit as recommended.
Oven bottom not securely
seated in position.
What To Do
• Replace the fuse or reset the circuit breaker.
• See the Using the clock and timer section.
grounded outlet.
• Call for service.
• See the Adjust the oven thermostat—Do it yourself!
section.
• Replace the fuse or reset the circuit breaker.
• See the Using the oven section.
• Press the BAKE pad and desired temperature or the
SELF CLEAN pad and desired clean time.
• Replace the fuse or reset the circuit breaker.
• See the S pecial features of your oven control section.
• See the Using the oven section.
• Make sure you press the BROIL HI/LO pad.
• See the Broiling Guide.
• Use the broiling pan and grid that came with your oven.
• See the Using the oven section.
• See the Care and cleaning of the range section.