These items will be identified in the following sections. Please discuss these features and any questions you may have regarding the installation of this product with Your Authorized Dealer. G-20 - Page 1...
Button 2 Button 4 Button 3 The G-20 Security System is supplied with two 4-button Remote Transmitters used to control system operations. Button 1 Arms the system and when held for 2 seconds, activates the system’s Panic feature. Button 1 also locks the doors when the system is in Valet Mode.
The LED indication will repeat 8 times. LED Flashes: 1 flash optional sensor 2 flashes shock sensor 3 flashes not used 4 flashes door 5 flashes trunk 10 flashes main power interrupt or system was reset example: flash-flash-pause-flash-flash-pause = shock sensor G-20 - Page 3...
When programmed for the optional Passive Arming feature, the system arms itself automatically, each time the ignition is turned off and all of the doors, hood, and trunk are closed. To start the Passive Arming Process: Page 4 - G-20...
To Emergency Override the system using the Code: 1. Follow steps 1-3 above. 2. Press the override switch a number of times equal to the Disarm code, and continue holding for G-20 - Page 5...
LED may not be as bright. In order to change the battery, separate the top and bottom halves of the case. While replacing the battery make sure that the positive and negative terminals are positioned correctly, then carefully reassemble the transmitter case. Page 6 -G-20...
Auxiliary Function Outputs The G-20 Security System is equipped with an Auxiliary Output allowing the convenience features of the system to be further expanded. This output can be used to add an optional feature such as: power trunk release, remote engine start, power window activation, power sunroof control, etc.
Page 10
Windows 10Sec - Upon Arming, Interior Light Output turns ON for 10 Sec.* Windows 30Sec - Upon Arming, Interior Light Output turns ON for 30 Sec.* * For Optional Window Rollup Module. Page 9 - G-20 G-20 - Page 9...