Table of Contents
Advertisement
Surface Burner Controls
The knobs that turn the surface burners on and off are
located on the control panel in front of the burners.
The two knobs on the left control the left front and
left rear burners. The two knobs on the right control
the right front and right rear burners.
Before Lighting a Burner
If drip pans are supplied with your range,
they should be used at all times.
Make sure all grates on the range are in place
before using any burner.
After Lighting a Burner
After the burner ignites, turn the knob to adjust the
flame size.
Check to be sure the burner You turned on is the one
you want to use.
How to Select Flame Size
Watch the flame, not the knob, as you reduce heat.
The flame size on a gas burner should match the
cookware you are using.
FOR SAFE HANDLING OF COOKWARE NEVER
LET THE FLAME EXTEND UP THE SIDES OF
THE COOKWARE.
Any flame larger than the bottom of the cookware is
wasted and only serves to heat the handle.
ranges with sealed burners:
On
The smaller burner (right rear position) will give
the best simmer results. It offers precise cooking
performance for delicate foods, such as sauces or
foods which need to cook over low heat for a
long time. It can be turned down to a very low
simmer setting.
others and will bring liquids to a boil quicker
(natural gas installations only).
To Light a Surface Burner
will hear a little "clicking"
noise—the sound of the electric
spark igniting the burner.
Do not operate a burner for an extended period of
time without cookware on the grate. The finish on the
grate may chip without cookw~e to absorb the heat.
Be sure the burners and grates are cool before you
place your hand, a pot holder, cleaning cloths or
other materials on them.
-—
9
Advertisement
Table of Contents
