Table of Contents
Advertisement
How to Delay Start of Cleaning
Delay Start is setting the oven timer to start the clean
cycle automatically at a later time than the present
time of day.
NOTE: Before beginning make sure the oven clock
shows the correct time of day.
Quick Reminder—Delay Start for Self-Clean:
1.
Prepare the oven for cleaning.
2. Close the oven door.
3. Press the CLEAN pad.
4. Press the INCREASE or DECREASE pad until
the desired Clean Time appears.
5. Press the STOP TIME pad.
6. Press the INCREASE or DECREASE pad until
the desired Stop Time appears in the display.
For example:
Let's say it's 7:00 and you want the
oven to begin self-cleaning at 9:00 after you're
finished in the kitchen.
1.
Prepare the oven for cleaning.
2. Close the oven door and slide the latch handle to
the right as far as it will go. Make sure the oven
light is off.
Never force the door latch handle. Forcing the
handle may damage the door lock mechanism.
u
CLEAN
Press the INCREASE pad. The oven is set.
4.
The Clean Time is preset for 4 hours. You can change
5.
the Clean Time to any time between 2 and 4 hours,
depending on the amount of soil in you oven. If a
shorter Clean Time is desired, press the DECREASE
pad until the desired Clean Time is displayed.
26
(continued)
6. Press the STOP TIME pad. "11:00"
STOP
appears in the display and "STOP
TIME
TIME" flashes.
The control automatically sets the
Stop Time by adding the Clean Time
to the time of day.
In this example, the time of day is 7:00
and the Clean Time is 4 hours. Adding 4
hours to the time of day equals 11:00.
7. Change the Stop Time from 11:00 to 1:00 by
pressing the INCREASE pad until"1 :00" appears
in the display. The words "DELAY CLEAN" will
also appear in the display.
The self-clean cycle will automatically begin at 9:00
and finish at 1:00. The word "ON" will appear in the
display at 9:00.
When the oven locks,
displayed and a short time later the door latch handle
will be locked in position. It will not be possible to
open the oven door until the temperature drops below
the lock temperature.
When the clean cycle is finished, the word "CLEAN"
will go out in the display and the oven will begin to
cool. When the oven temperature has fallen below the
locking temperature the word "LOCK" goes out and
the door can be opened.
8. When the LOCK light is off, slide the latch handle
to the left as far as it will go and open the door.
Never force the latch handle. Wait until the
word "LOCK" goes out in the display. Forcing
the latch handle may damage
the word "LOCK" will be
the lock.
Advertisement
Table of Contents
