Address Reservation - TP-Link TL-WA830RE User Manual

4.6.3 Address Reservation

Selecting DHCP > Address Reservation will enable you to specify a reserved IP address for a
PC on the LAN, so the PC will always obtain the same IP address each time when it accesses the
Range Extender. Reserved IP addresses should be assigned to servers that require permanent IP
settings. The screen below is used for address reservation (shown in Figure 4-26).
MAC Address - Here displays the MAC address of the PC for which you want to reserve an

IP address.
Reserved IP Address - Here displays the IP address that the Range Extender is reserved.

Status - Here shows whether the entry is enabled or not

Modify - To modify or delete an existing entry.

To Reserve IP Addresses, you can follow these steps:
1. Enter the MAC Address (The format for the MAC Address is XX-XX-XX-XX-XX-XX) and the
IP address in dotted-decimal notation of the computer you wish to add.
2. Click the Save button.
To modify a Reserved IP Address, you can follow these steps:
1. Select the reserved address entry as you desired, modify it. If you wish to delete the entry,
click the Delete link of the entry.
2. Click the Save button.
Click the Add New... button to add a new Address Reservation entry.
Click the Enable All button to enable all the entries in the table.
Click the Disable All button to disable all the entries in the table.
Click the Delete All button to delete all the entries in the table.
Click the Next button to go to the next page, or click the Previous button return to the previous
page.

Note:
The changes won't take effect until the device reboots.
TL-WA830RE 300Mbps Wireless N Range Extender User Guide
Figure 4-26 Address Reservation
39