TP-Link TL-WA830RE User Manual page 27

Figure 4-7 The WPS Configuration Screen of Wireless Adapter

Note:
The default PIN code of the Range Extender can be found in its label or the WPS configuration screen
as Figure 4-3.
You will see the following screen when the new device has successfully connected to the network.

Note:
1. The WPS LED on the Range Extender will light green for five minutes if the device has been
successfully added to the network.
2. The WPS function cannot be configured if the Wireless function of the Range Extender is
disabled. Please make sure the Wireless function is enabled before configuring the WPS.
TL-WA830RE 300Mbps Wireless N Range Extender User Guide
Figure 4-8
19