Reboot - TP-Link TL-WA830RE User Manual

Click Backup to save all configuration settings to your local computer as a file.
To restore the device's configuration, follow these instructions:
Click Browse... to find the configuration file which you want to restore.
•
Click Restore to update the configuration with the file whose path is the one you have
•
input or selected in the blank.

Note:
The current configuration will be covered with the uploading configuration file. Wrong process will
lead this device unmanaged. The restoring process lasts for 20 seconds and this device will restart
automatically then. Keep the power of this device on during the process, in case of any damage.

4.7.7 Reboot

Selecting System Tools > Reboot allows you to reboot the device on the screen shown in Figure 4-35.
Click the Reboot button to reboot the device.
Some settings of the device will take effect only after rebooting, which include:
Change LAN IP Address (System will reboot automatically).
•
Change the Wireless configurations.
•
Change the Web Management Port.
•
Upgrade the firmware of the device (system will reboot automatically).
•
Restore the device's settings to factory defaults (system will reboot automatically).
•
Update the configuration with a file (system will reboot automatically).
•
TL-WA830RE 300Mbps Wireless N Range Extender User Guide
Figure 4-34 Save or Restore the Configuration
Figure 4-35 Reboot the device
46