Table of Contents
Advertisement
Chapter 3
Done!
3 11
Administration
3 11 1
LAN IP Address
Follow the steps below to configure LAN settings of the extender.
Connect to the powerline extender wirelessly. Visit http://tplinkplc.net, and log in with
the username and password you set for the extender.
Go to
Device Settings
LAN Type:
Select
Dynamic IP
from the main router. Select
IP Address:
The IP address of the powerline extender.
Subnet Mask:
The subnet mask associated with IP address.
Default Gateway:
The IP address of the gateway device.
3 11 2
Set Up System Time
System time is the time displayed while the extender is running. The system time you
configure here will be used for other time-based functions like Parental Controls, Wi-Fi
Schedules. You can manually set how to get the system time.
Connect to the powerline extender wirelessly. Visit http://tplinkplc.net, and log in with
the username and password you set for the extender.
Go to
System Tools
>
8 Click
Enable this entry
9 Click
OK
to save the settings.
Now MAC Filter is implemented to protect your wireless network.
>
LAN
Settings.
to have your extender automatically obtain IP Address
Static IP
to manually configure the LAN parameters.
Time Settings
page.
Configuring via Web Management Interface
to make this entry effective.
28
Advertisement
Table of Contents
