The Message; On The Lcd Panel - Epson AcuLaser C8600 Reference Manual

The message

LCD panel
Cause
There is not enough memory
for duplex printing. The
printer prints only on the top
side and ejects the paper.
The message
panel
Cause
The printer has insufficient
memory to print the page at
the specified print quality.
The message
panel
Cause
The printer has insufficient
memory to execute the current
task.
314 Troubleshooting
What to do
If is set to
Menu, press the Start/Stop button.
If is set to
Menu, the error is automatically
corrected after a certain period of time.
appears on the LCD
What to do
The printer automatically reduces the
print quality so that it can continue
printing. If the quality of the printout is
not acceptable, try simplifying the page
by limiting the number of graphics or
reducing the number and size of fonts.
Lower the resolution setting to 300 dpi.
appears on the LCD
What to do
To correct the error, press the
Start/Stop button on the control panel.
appears on the
in the Setup
in the Setup