1. Click the Optional Settings tab.
2. Select the Update the Printer Option Info Manually button, then
click the Settings button. The Optional Settings dialog box
opens.
3. Select the HDD Unit check box.
4. Click OK.
Reformatting the Hard Disk Drive
To reformat the Hard Disk Drive, follow the instructions below.
1. Make sure the printer is off. Disconnect the all interface cables.
2. Hold down the d Down button while you turn on the printer.
3. Press the d Down button a few times until
appears on the LCD panel, then press the
to format the Hard Disk Drive.
Note:
After reformatting the Hard Disk Drive, the printer will
automatically reboot.
When you want to erase only the fonts installed from the optional
Adobe PostScript 3 (PS3), follow steps 1 through 3 above. Select
PS3 HDD Init when the optional Adobe PostScript 3 Rom module
is installed.
Other fonts installed from PS3 will also be erased.
When installing a Hard Disk Drive from a different printer,
reformat it with this function.
Enter button
Using Options
7
7
7
7
7
7
7
7
7
7
7
7
231